i would get a t3 but kinda short on cas and i got my td04hl-15g for free, and i believe that the internal wastegate is set to 8psi, which is all i want to run for now, in the futer i will consider a t3

 

true cant beat free, btw are you just gona make an adaptor there off the stock header

 

naww that is why i bought the smiley welder, im gunna try to make a log style header, i hope it works out. and one question with ur turbo focus where dud you tap in for oil, someone told me that there is a torx screw on the back of the block that goes throught a oil canal. and did you use a oil pressure regulator.

 

ya I got my oil from the back of the block but an easier way is to take the coil of the head and use that spot.
The back of the block uses an odd size torx 45 could not find it anywhere so I used one smaller and almost
stripped it, but it came out. Plus if you take it of the head it's a lot shorter feed line.
PS run the MAF as a blow through it's much better.

 

Silly little fella,you cant weld ----.Its non ferrous :P

 

how much are those beasts? im thinking about ordering one myself. are they 110 or 220?

 

mine cost me 650$ shipped and they are 220V, and what you mean about the MAF i should put after the turbo with compression or before the turbo, i was originally going to mount it before the turbo like the persiosion turbo kits has it.

 

I mean put it after the intercooler so the turbo is blowin into it and not sucking throught it