Stealthmodes Random Fabricator/Engineering Challenge
12-05-2008, 12:17 AM
#21
3.0 BAR
Join Date: Sep 2004
Posts: 1,588
Re: Stealthmodes Random Fabricator/Engineering Challenge
I'd say you're on the right track with the bar stock going the whole way across the front and back of the seat.
Just use flat head socket head cap screws and countersink the holes in the bar stock to minimize the added height.
The tab would work, but this would be stronger
Just use flat head socket head cap screws and countersink the holes in the bar stock to minimize the added height.
The tab would work, but this would be stronger
12-05-2008, 11:11 AM
#23
3.0 BAR
Join Date: Sep 2004
Posts: 1,588
Re: Stealthmodes Random Fabricator/Engineering Challenge
Blowes has a decent supply of metrics, if not:
www.mcmaster.com
They have anything you want. If they won't ship to you let me know I'll throw the bolts in with my next order and forward it on, you'd be getting 100 though.
www.mcmaster.com
They have anything you want. If they won't ship to you let me know I'll throw the bolts in with my next order and forward it on, you'd be getting 100 though.
12-05-2008, 08:41 PM
#24
0.0 BAR
Thread Starter
Join Date: Feb 2003
Posts: 0
Re: Stealthmodes Random Fabricator/Engineering Challenge
I usually find a good selection of metric stuff at Ace Hardware too. If it came down to taking the bolt head height or ordering ---- online, I'll take the bolt head.
12-05-2008, 09:11 PM
#25
1.0 BAR
Join Date: Jul 2003
Posts: 541
Re: Stealthmodes Random Fabricator/Engineering Challenge
Originally Posted by Stealthmode
I usually find a good selection of metric stuff at Ace Hardware too. If it came down to taking the bolt head height or ordering ---- online, I'll take the bolt head.
12-06-2008, 05:36 PM
#28
1.0 BAR
Join Date: Jul 2003
Posts: 541
Re: Stealthmodes Random Fabricator/Engineering Challenge
Originally Posted by Stealthmode
In my country, I am well respected. I'll brush your fucken knees, peter-pie *** ni66a.
