Speeder

I got the 30a smiley unit, and it has 3 wires (2 hot, with "ground") and a ground on the case in the back. Shouldn't the "ground" wire be neutral?

bumblezc

Just hook of the 3 wires and your good to go.

Speeder

fair enough, so 2 110v and a ground

SpankedYA!

Yes.

jeeve

nvm

Speeder

man!

spent half of the day wiring it up (did not have 220v), getting the compressor, hooking it up, and realized they forgot to include the ground clamp!!! ugh!

p.s. how the heck would you hook up argon to the connection in the back? with the nylon hose? Just plain air seems ghetto rigged as is.

p.s.s is the air regulator supposed to "leak" out of the valve or whatever it is on the other side of the gauge?

p.s.s.s should the breaker be 20 amp or 30 amp? (highest input current according to the chart is 19amp)

bumblezc

Yes Argon goes to the same input as the air. I rigged up a quick connect system so it only takes me 2 seconds to switch.

Argon get connected with a Hose and Hose Clamp.

As for the 20 or 30. Might be fine on the 20 amp, but I know mine is on a 30.

Speeder

how did you do the quick connect thing?

bumblezc

I used some gas quick connects, like the one for oxy-acetelene torches. For a while I used just reqular air line fittings.