Pre-runner bumper for my blazer
 

This is a PreRunner style front bumper for my 99' BlaZeR2 (blazer zr2)

Used 1/4" thick 2" wide piping (1.5" inside diameter), angle iron, and a bit of flat iron~ and LOTS of 4" cutoff wheels.

The frame will bend before this bumper bends 8)

Yea, it's welded straight to the frame, but it doesn't hinder or get in the way of anything. Front approach angle is still just as high.

I used a Mig welder, and a 12 ton hydraulic jack pipe bender (ebay $100)


$50 in supplies and 10hrs of man labor later~~~ presto!

Still needs to be painted~ (will do on sat night) an then i'll get some daytime shots of it~ 8)

Attachment 30663
Attachment 30664
Attachment 30665
Attachment 30666[/i]





My dad's jeep also infuenced some ideas.


You guys think i should put the yellow fog lamps on the front bar?

Attachment 30667
Attachment 30668
Attachment 30669
Attachment 30670
Attachment 30671

Re: Pre-runner bumper for my blazer
 

looks good.
ditch the yellow fogs.
get a winch, everythings cooler with a winch

Re: Pre-runner bumper for my blazer
 

Looks good but I do agree with him ditch the light and which it up.

Re: Pre-runner bumper for my blazer
 

looks decent

should have thrown a straight axle under that bitch, ---- IFS...

Re: Pre-runner bumper for my blazer
 

That's comming next summer... Until then, i deal with my quick disconnect sway bar mod. (wing nuts on the sway bar end links)

This spring is the 5.7 Vortec swap.

The 4.3 v6 @ 260ft/lbs isn't enough... I like 355ft/lbs @3600rpm >:D

Re: Pre-runner bumper for my blazer
 

How thick is the frame rail?

Re: Pre-runner bumper for my blazer
 

Looks great. I may do a tubular on the XJ.

Re: Pre-runner bumper for my blazer
 

chevy ifs = gargabe, swap in some yoda front pinnings

Re: Pre-runner bumper for my blazer
 

:y

First thing that came to mind when I saw the pics.

Re: Pre-runner bumper for my blazer
 

Love the R motor swaps in those things. It looks so at home in the engine bay. :P