Re: Poor Man's exhaust cut-out
ground off the lip on the TB and put it in a 2.5" steel pipe with the widened end (for slipping a 2.5" piece into it)..if that makes sense.
Then I drilled 2 holes 180 degrees or so away from eachother through both the steel and aluminum and drilled screws into them. |
Re: Poor Man's exhaust cut-out
Originally Posted by SloS13
ground off the lip on the TB and put it in a 2.5" steel pipe with the widened end (for slipping a 2.5" piece into it)..if that makes sense.
Then I drilled 2 holes 180 degrees or so away from eachother through both the steel and aluminum and drilled screws into them. |
Re: Poor Man's exhaust cut-out
AWeSOME
|
Re: Poor Man's exhaust cut-out
For anyone that cares, I think a 91+ Jeep Cherokee 4.0 throttle body would work really well for this type of application. Here is a pic of what they look like:
http://www.xj-armor.com/tb/ho_tb3.jpg |
Re: Poor Man's exhaust cut-out
Oh hell yes.
I have an LSx throttle body sitting in my toolbox. ;D |
Re: Poor Man's exhaust cut-out
Whoa....
HMT goodness, nice job, recycling a TB, helping to save the planet. |
Re: Poor Man's exhaust cut-out
do you have to hold it open? nice work.
|
Re: Poor Man's exhaust cut-out
Nice job, even got the hmt birdshit welds.
|
Re: Poor Man's exhaust cut-out
Originally Posted by weiRtech
do you have to hold it open? nice work.
|
Re: Poor Man's exhaust cut-out
looks like you are using a choke cable..... only it's an un-choke cable now... awesome....
|
All times are GMT -5. The time now is 02:57 PM. |
© 2024 MH Sub I, LLC dba Internet Brands