oil feed fitting

Reply Subscribe

Thread Tools

Search this Thread

10-23-2007, 08:57 PM

fritt

0.0 BAR

Thread Starter

Join Date: Oct 2005

Posts: 16

oil feed fitting

hey guys i just wanted to show you the oil fitting that goes into the back of the block for my oil feed line that i made out of an old oil pressure sensor and a nut. Do you guys think it will work allright

Name: Picture074-2.jpg
Views: 9
Size: 70.5 KB

Name: Picture071-1.jpg
Views: 11
Size: 66.1 KB

sorry for the crappy pics my camera sucks

10-23-2007, 09:04 PM

CRXDrew

1.5 BAR

Join Date: Oct 2004

Posts: 892

Re: oil feed fitting

jesus... i guess it'll work but sometimes its worth a few bucks to just get a nice brass / steel fitting.

HMT worthy for sure however

10-24-2007, 03:58 PM

TunerToys

Guest

Join Date: Dec 2002

Posts: 1,463

Re: oil feed fitting

That's some solid Homemade action there.

Craig

10-24-2007, 04:13 PM

michigan_soler

1.0 BAR

Join Date: Aug 2005

Posts: 334

Re: oil feed fitting

if it doesn't leak, rock it!

hmt ftw

10-24-2007, 04:40 PM

SpankedYA!

0.0 BAR

Join Date: Mar 2004

Posts: 0

Re: oil feed fitting

Is it welded or JB welded? I can't tell by the pics. If its JB welded its not going to hold for long and you will contacting Tuner Toys shortly!

10-24-2007, 04:59 PM

ghettoturbo

Guest

Posts: n/a

Re: oil feed fitting

did you make the hole in the sender bigger so it will flow enough? I assume you did since you obviously drilled it out when you welded the nut on the back

10-24-2007, 05:12 PM

klyph

1.5 BAR

Join Date: May 2007

Posts: 749

Re: oil feed fitting

lol, ur such a cheapass jew.

nice work and omg sweet manifold :1

10-24-2007, 08:53 PM

fritt

0.0 BAR

Thread Starter

Join Date: Oct 2005

Posts: 16

Re: oil feed fitting

yeah i know this is very getto but i want to get my da boosted this weekend and i dont want to wait another week or 2 for a fitting to arrive and no its not jb welded i just used a mig at my work and it doesnt have any leaks