miging stainless
i plan to mig some stainless together this weekend for an exhaust need to know if anyone here has sucessfully done it with a mig using 75/25 argon/co2. any pics etc. i heard to use helium but i only have a single bottle and dont want to get helium if i can get by without.
|
Re: miging stainless
c25 is for mild, use either trimix or straight argon
|
Re: miging stainless
Trimix aka"gold gas" is rad as hell. You can run a real nice weld on stainless with the right gas and wire. good luck man
|
Re: miging stainless
oh yeah tri mix is alot easier to weld with than straight argon... but you can use either..
|
Re: miging stainless
DO NOT use 100% helium. The arc will wander so badly that you won't be able to get a good weld made.
|
Re: miging stainless
anybody want to explain exactly what trimix is?
If I go down to my local Airgas will they know what it is? |
Re: miging stainless
Yes.
|
Re: miging stainless
how thick of a piece of stainless steel can a 110v mig welder (lincoln sp135plus) mig with "trimix"...? dont mean to thread jack, i'm interested in the same thing. can it do exhaust/IC pipes?
|
Re: miging stainless
tri mix is mostly helium with a little argon and a trace of co2
the more co2 you add the more corrosion resistance you loose with stainless. the SS exhaust welds i did on my car using c25 have evidence of rust even though its SS tubing and SS filler |
Re: miging stainless
just use argon, it'll be fine... also make sure you use the proper wire!
|
All times are GMT -5. The time now is 07:51 PM. |
© 2024 MH Sub I, LLC dba Internet Brands