Re: manual exhaust cut out
 

Correction on that Jago you're wrong about that.


The ID on this TB is 2.5" which (in my opinion) is pretty damn good for what you're wanting to do.

Re: manual exhaust cut out
 

No it's not. Try measuring at the IM side.

b7 TB=56 mm

Why did you agree about the 2.2" earlier? You know nothing.

Re: manual exhaust cut out
 

because I remembered measuring the intake side earlier this week and it was 2.5". However, I didn't take it off and measure the IM side. You jump to conclusions and are vague with your answers... you know nothing.

Re: manual exhaust cut out
 

This thread proves otherwise.

Re: manual exhaust cut out
 

You will not get the last word :P

Re: manual exhaust cut out
 

I won't, but I don't need it to not look like a fool 8)

Re: manual exhaust cut out
 

... ;)

Re: manual exhaust cut out
 

You mofo's just made my day; what a pointless thread :6. To the op GOOGLE is your friend.

Re: manual exhaust cut out
 

wow, this just made my day

Re: manual exhaust cut out
 

Just get almost any TB and the throttle cable, a square plate of steel, and a tube the size of the TB. Mount it to plate, cut big hole, weld the adapter to exhaust, route cable inside. OBD1+ B-series = 60mm, most d's = 56mm, ford 4.6L (crown vic, mustang, etc) = 65mm. I just bought 2 ford TB's for $20/shipped each and plan to hook the cable up to an 8lb solenoid. WOT activates switch, auto-cutout in 1/10th of a second.

BTW if you look in the Yellow Pages you'll find some rental places around you. Homeboy Depot also rents them at most stores. Fluxcore madness! O0