look out cc fab, my arc welding fab skeeeelz!(56k dont try now), new pics added
 

So i finally got around to making my STD man to t3 adapter keeping my a/c. The 90 deg bend is only sch 10, but i'm gonna but some angle iron braces from one flange to the other to make sure it holds good. For the flanges I cut the flange off the std downpipe, then inserted the 2.5" pipe and tacked it in there, then stretched/heated/hammered it out to fit the shape. The flange to the turbo is from my friends focus that he put a new downpipe w/ cat on. I was it and was like, hey, that might work for a t3 flange, the opening is a little big, but i just drilled new holes to line up with the t3 and i'm good. As far as clearance, the turbo almost sits on top of the front crossmember, i'm gonna cut out some material from it for engine movement and oil drain, then possible weld in some 1" or .75" square tube to brace it. if the oil drain is level or uphill, i'll be making one of those HMT ghetto topmounts out of my 4-2-1 header.

Anyways, heres the pics of my major lack of skill with a welder :1, keep in mind it was an arc welder on mild steel and cast steel.


Attachment 35503

Attachment 35504
i need to grind down that bead a little to get the manifold to bolt up flush

Attachment 35505

Attachment 35506
ooops, too much heat :1 had to add 2 more pieces of pipe on top of a burned spot

all bolted together:

Attachment 35507

Attachment 35508

downipipe will be a nice exit here, just 90 degrees, then straight back

Attachment 35509

here's my dsm intercooler, it will be going in place of the battery/airbox, nice short intercooler piping. i cut the holes out to fit 2.25" piping for better efficiency, some dsm site said it helped out alot:

Attachment 35510

Attachment 35511

HMT, JB weld, and ARc madness fo eva O0

and in case anybody took the title seriously i was just kidding

Re: look out cc fab, my arc welding fab skeeeelz!(56k maybe)
 

------- sweet welding action :D JB weld + Arc welded :y

Re: look out cc fab, my arc welding fab skeeeelz!(56k maybe)
 

AAAAHHHHH, HMT is feeling like home again, No TIG, Just Stick and JB!!!! It's like my first setup all over!!!

Re: look out cc fab, my arc welding fab skeeeelz!(56k maybe)
 

ya gotta start somewhere, just to see if you can do it

Re: look out cc fab, my arc welding fab skeeeelz!(56k maybe)
 

that is so steller, nig rigged ---- is the way to go, then people feel stupid when they get beat by you, they realize that all their shiney valve covers and engine dress ups dont help them up much

Re: look out cc fab, my arc welding fab skeeeelz!(56k maybe)
 

Oh I know. I remeber weld exhuast patch pipes together with or old 50yr old Arc at 170amps because every other temp setting was burnt out!!!

Re: look out cc fab, my arc welding fab skeeeelz!(56k maybe)
 

Ugly as hell but we are damn proud of you for doing it!

Re: look out cc fab, my arc welding fab skeeeelz!(56k maybe)
 

Post pics of the drain line when you get it installed :y

Re: look out cc fab, my arc welding fab skeeeelz!(56k maybe)
 

id bet that JB cracks

Re: look out cc fab, my arc welding fab skeeeelz!(56k maybe)
 

only problem is it wont be a drain line, it will be more like a breather for the turbo since the line will most likely be going uphill. Basing that solely off the fact that he said its sitting on the xmember. Either way, nice hmt set up.