i want to build a manifold
04-24-2009, 04:13 PM
#1
3.0 BAR
Thread Starter
Join Date: Mar 2008
Location: texas
Posts: 2,598
i want to build a manifold
i want to build a manifold for a turbo but i was wondering whether or not i really need a welder i wanna do this all by myself and i dont see why i cant use those exhaust clamps from autozone to hold it together
04-24-2009, 08:00 PM
#4
0.0 BAR
Join Date: Apr 2009
Posts: 7
exhaust clamps :/ not sure what clamps ur talkin about, but over here in the uk those piece of ---- clamps have problem enough holding a straight section of exhaust under the car clamped together, throw in the extra heat of a manifold and turbo,
....................................
WTF a turbo manifold with clamps, why not throw in some chewing gum and sticky back plastic, strap the turbo on with some cable ties n bobs ur uncle.
....................................
WTF a turbo manifold with clamps, why not throw in some chewing gum and sticky back plastic, strap the turbo on with some cable ties n bobs ur uncle.
04-27-2009, 12:34 PM
#10
0.0 BAR
Join Date: Apr 2009
Posts: 26
There are...exhaust clamps? That would be a big no on that one for holding together a manifold. Weld it together man. Try to build a nice elephant trunk top mount set up. Just use some 90 degree piping and couple mandrel bends welded to bottom of a two piece header (welded to cut bottom half of course).
