Re: How do I bore out the center of a wheel?
 

what the heck is a fly cutter? can I use it on a drill press?

Re: How do I bore out the center of a wheel?
 

http://cgi.ebay.com/FLYCUTTER-SET-3p...QQcmdZViewItem

would this work on a drill press? googling says its a dangerous tool... This tool must be really bad since all tools can be dangerous.

Re: How do I bore out the center of a wheel?
 

i wouldn't buy one, just call a machine shop and see how much they'd charge. It will probably be cheaper than 78 dollars.

Re: How do I bore out the center of a wheel?
 

i've read on the net it cost about 10-20 per wheel..

Now with this tool I might be able to bore out a throttle body also. If it even works

Re: How do I bore out the center of a wheel?
 

you don't have to bore them, you can clear them with some 3mm wheel spacers, I am using a set of toyota celica 15" rims for my winter tires, and at first I was going to bore them but when I started the measuring I figure out the center part of the hub sticks out 3mm so I ordered 4 3mm spacers, and fit the rims perfectly.

Re: How do I bore out the center of a wheel?
 

I'd rather fix the wheels then use spacers

Re: How do I bore out the center of a wheel?
 

flycutters have to be used in a mill or lathe, they only cut on that one blade that sticks out and everything has to be very solidly mounted.

Re: How do I bore out the center of a wheel?
 

Die grinder :D I would take them to a machine shop for the less then $100 it will be if you go to the back door with beer and cash ;)

Re: How do I bore out the center of a wheel?
 

Mount the rim on a mill. Dial indicate the center. Chuck up the flycutter, and make the cut.

No you wouldn't want to do that because you can't accurately find the center of the rim on a drill press. You need a mill so you can move the table.

Re: How do I bore out the center of a wheel?
 

cutting torch
O0