How do I bore out the center of a wheel?
I have a set of wheels that I want to put on my teg, but the center hole is too small. How do I bore it out :8 style?
|
Re: How do I bore out the center of a wheel?
you probally need a lathe to do it right but are there center caps that would cover up the use of a dremel?
|
Re: How do I bore out the center of a wheel?
holesaw and light oil, a half round bastard, or a deburring bit for a die grinder (MUST keep oiled very well in order to prevent loading up)
only do this if you can get the tire balanced on the bolts (not the center hole) |
Re: How do I bore out the center of a wheel?
vw wheels? :8
Originally Posted by c0mpl3x
holesaw and light oil, a half round bastard, or a deburring bit for a die grinder (MUST keep oiled very well in order to prevent loading up)
only do this if you can get the tire balanced on the bolts (not the center hole) |
Re: How do I bore out the center of a wheel?
on a side note, i have a flycutter
|
Re: How do I bore out the center of a wheel?
I just used my die grinder with a carbide on it, only took lie a min per rim
|
Re: How do I bore out the center of a wheel?
are you going to be able to run hubcentric rings?
|
Re: How do I bore out the center of a wheel?
with and end mill or a lathe
|
Re: How do I bore out the center of a wheel?
Originally Posted by rawr
vw wheels? :8
hole saw on 2 inches of alumnium? Seriously now? The best way to do it would be to take it to a machine shop and have them use a flycutter on it. |
Re: How do I bore out the center of a wheel?
other way around
Snowflakes wouldn't fit on my car. |
All times are GMT -5. The time now is 12:26 AM. |
© 2024 MH Sub I, LLC dba Internet Brands