honda-chaser

so far this is just a prototype...set up for a single cam. Using a greddy cast iron manifold that I got for free with a TR0759 garrett turbo for free. Had a friend made me an adapter plate for it and here are the results so far....







to be continue.....

5G_4G15

clean machine work on the adapter. keep us posted.

turbof22a

did you test fit to an engine it looks like there maybe some clearance issues with the block. either way that turbo will be fast spooling and fun as ----

5G_4G15

is that a ball bearing turbo? forgive my ignorance. looks like a t-25?

turbof22a

no its just a standard journal bearing turbo it is the stock turbo from 95+ECLIPSE.

TAYZAAH

looks good

josh19wrc

is that adapter aluminum? it looks aluminum in the pictures.

5G_4G15

damn. i thought its was something more since it had all those numbers lol. j/k

honda-chaser

high grade aluminum.. almost a billet...it requires a very high temp to melt this bad boy, plus acording this piece, it can be kinda expensive..plus the amount of boost and the driving thats its creating is not even close to getting hot enough to the melting point...if anything I let you know...

to be continue...

turbof22a

im sorry to let you know this but aluminum starts to melt at ~1,200f exhaust gases get that hot. and thats just its melting point what are you going to do about warpage?