would welding some fins on the underside of the oil pan would lower your oil temps? does anyone have any experience with this? i think ive seen it on a v8.

 

haha
probably a tad

 

investing in an oil cooler would be easier/cheaper.

 

oil coolers are like 30 bucks on ebay

 

Fins on the pan is an old-school hot rod v8 trick. It'll help a little bit if you have road clearance like those old cars used to have, but if you've lowered the car quite a bit and have any kind of bumper lip extending down it pretty much negates the purpose. A remote mount oil cooler is a much better idea anyway.

 

But then the price for the remote mount, block adapter, hoses, radiator gets pretty pricey. I say try it out...what do you have to lose?

 

a very nice oil cooler set up can be had ffor under 100 bucks

 

Very nice foir $100? Nope

To do it properly and efficiently Im sure you $250+ if you use the right compression fitting and braided line and not a 1/2 *** oil cooler

I dunno how much affect fins on the pan would do, You mean like 1/2" fins or somethin going from front to back? Technically I guess it works, but I dont know ho much, and my oil pan aint but 2.5" off the ground anyways....

 

You will most effective heat disipation with aluminium. but the time you will have invested in cleaning fabing and welding is far to time consuming and less effective than a external oil cooler

get fittings from Aces stainless or WOFSCO

 

doesn't the S2000 or some other honda have a finned pan?