Finished homemade piping setup.
Got done with the fabrication of the 3"exhaust, 3"intake, and 2.5" IC piping for my setup the other day. Hell I know I ain't a pro welder. I go by the moto, "The bigger the glob, the better the job!" Thanks Austin for your help, I owe you some $. Thanks Steve for the couplers. Just gotta get Jung4g to powdercoat this stuff whenever he's available!
Here's a couple pics. Muffler is Bling Blang Blaow!! http://www.dsmstyle.com/forums/attac...tid=3039&stc=1 http://www.dsmstyle.com/forums/attac...tid=3038&stc=1 http://www.dsmstyle.com/forums/attac...tid=3050&stc=1 http://www.dsmstyle.com/forums/attac...tid=3051&stc=1 http://www.dsmstyle.com/forums/attac...tid=3049&stc=1 I'm sure some of you will bring forth some DSM hate, I expect it. But I'mjust happy with how it turned out. We fabricated everything our self that we could have! |
Re: Finished homemade piping setup.
nice job on doing it yourself, can you get close up pics of the weld?
|
Re: Finished homemade piping setup.
Ya I'll take a closer pic of my ghetto fabulous welds tomorrow and show them off to you. It's aluminized steel, so it was all done with a MIG.
|
Re: Finished homemade piping setup.
no worries man. as long as it doesnt leak, i think you'll be fine.
|
Re: Finished homemade piping setup.
nice job man. looks reall good. what muffler are you using? have you fired it up at all, sound good?
|
Re: Finished homemade piping setup.
Originally Posted by crx2fast
nice job man. looks reall good. what muffler are you using? have you fired it up at all, sound good?
Looks great, props for doing everything yourself. And on a sidenote, i love talons. ;) |
Re: Finished homemade piping setup.
mr worried bout crank walk, even if u had a 2g motor in there, all that stock stuff... you'll be fine for yearz to come lol jus playin man... looks good tho. i need to install my front mount n run the ic piping already =x i've had it for weeks n haven't even taken off the bumper yet for test fits. good job man
|
Re: Finished homemade piping setup.
Thanks for the comments. I'll get some close ups of the welds later. I'll show ya what I think were some of my better ones, and I'll try to get some shots of the real globby ones too!
|
Re: Finished homemade piping setup.
Badass. Did you do the bends yourself? If so, how?
|
Re: Finished homemade piping setup.
We bought the bends, then cut them and welded them as needed. Also I forgot to answer, It is just some cheap Megan Racing 3" inlet muffler that was laying in my buddies garage unused. So I figured it would work. We'll see how good or bad it is. I haven't started it up yet because I have to plug one oil line, plug one coolant line, and fix my leaky turbo drain line. Then we'll start it up and see how it sounds. And ya, I know the welds won't leak. If there was a spot that looked like a potential leak, it got more weld globbed on it!
|
All times are GMT -5. The time now is 12:34 AM. |
© 2024 MH Sub I, LLC dba Internet Brands