Finished homemade piping setup.
Got done with the fabrication of the 3"exhaust, 3"intake, and 2.5" IC piping for my setup the other day. Hell I know I ain't a pro welder. I go by the moto, "The bigger the glob, the better the job!" Thanks Austin for your help, I owe you some $. Thanks Steve for the couplers. Just gotta get Jung4g to powdercoat this stuff whenever he's available!
Here's a couple pics. Muffler is Bling Blang Blaow!! http://www.dsmstyle.com/forums/attac...tid=3039&stc=1 http://www.dsmstyle.com/forums/attac...tid=3038&stc=1 http://www.dsmstyle.com/forums/attac...tid=3050&stc=1 http://www.dsmstyle.com/forums/attac...tid=3051&stc=1 http://www.dsmstyle.com/forums/attac...tid=3049&stc=1 I'm sure some of you will bring forth some DSM hate, I expect it. But I'mjust happy with how it turned out. We fabricated everything our self that we could have! |
Re: Finished homemade piping setup.
nice job on doing it yourself, can you get close up pics of the weld?
|
Re: Finished homemade piping setup.
Ya I'll take a closer pic of my ghetto fabulous welds tomorrow and show them off to you. It's aluminized steel, so it was all done with a MIG.
|
Re: Finished homemade piping setup.
no worries man. as long as it doesnt leak, i think you'll be fine.
|
Re: Finished homemade piping setup.
nice job man. looks reall good. what muffler are you using? have you fired it up at all, sound good?
|
Re: Finished homemade piping setup.
Originally Posted by crx2fast
nice job man. looks reall good. what muffler are you using? have you fired it up at all, sound good?
Looks great, props for doing everything yourself. And on a sidenote, i love talons. ;) |
Re: Finished homemade piping setup.
mr worried bout crank walk, even if u had a 2g motor in there, all that stock stuff... you'll be fine for yearz to come lol jus playin man... looks good tho. i need to install my front mount n run the ic piping already =x i've had it for weeks n haven't even taken off the bumper yet for test fits. good job man
|
Re: Finished homemade piping setup.
Thanks for the comments. I'll get some close ups of the welds later. I'll show ya what I think were some of my better ones, and I'll try to get some shots of the real globby ones too!
|
Re: Finished homemade piping setup.
Badass. Did you do the bends yourself? If so, how?
|
Re: Finished homemade piping setup.
We bought the bends, then cut them and welded them as needed. Also I forgot to answer, It is just some cheap Megan Racing 3" inlet muffler that was laying in my buddies garage unused. So I figured it would work. We'll see how good or bad it is. I haven't started it up yet because I have to plug one oil line, plug one coolant line, and fix my leaky turbo drain line. Then we'll start it up and see how it sounds. And ya, I know the welds won't leak. If there was a spot that looked like a potential leak, it got more weld globbed on it!
|
Re: Finished homemade piping setup.
Looks good man. Where are you in Minneapolis? gotta represent the HMT TC crew O0
|
Re: Finished homemade piping setup.
Lookin' good man. Now get it drivable before winter hits!
|
Re: Finished homemade piping setup.
No DSM hate here!!! I love the 1st Gen DSMs. I had a talon once....Had the notorious ecu resistor leak. Swaped the ecu and removed the restictor. Ate some 15 sec. hondas easily at half throttle. Also isn't the crankwalk on the 2nd Gen 6 bolt motor!??
|
Re: Finished homemade piping setup.
<---DSM hater. :P
Bring that stuff over so I can dub it. ;D |
Re: Finished homemade piping setup.
I'm in Brooklyn Park, couple minutes from the 694 & 252 intersection. Ya Steve we'll dub this ---- some day. I'm more worried about getting it running so I can enjoy it for maybe 2 weeks until winter hits. Thanks for the comments. Austin gimme a ring when you wake up nig, help me get this thing moving!!
|
Re: Finished homemade piping setup.
Originally Posted by Stealthmode
<---DSM hater. :P
Bring that stuff over so I can dub it. ;D |
Re: Finished homemade piping setup.
looks good. you get the flexpipe from roadrace?
what size is the dp? |
Re: Finished homemade piping setup.
Originally Posted by SinisterCRX
Video? :D
Looks great, props for doing everything yourself.... |
Re: Finished homemade piping setup.
I think I got the flex from kteller. I was kinda disappointed with it's size. The thing is like 6" long. I should have gone with roadrace. I'm going outside now so I'll take a couple pics of the welds.
I can try to make a lil video with my digicam, but I don't know how to upload that crap to the net. Plus before I make a video, I have to get the thing running. Finally got the slim fan in today and the cooling line plugged. All that's left is to fix my oil drain line leak, and plug the stock oil feed location. |
Re: Finished homemade piping setup.
what size is the downpipe? looks like 2.5"
|
Re: Finished homemade piping setup.
The O2 housing is 2.5", but from the Downpipe back is 3". Here's a couple snap shots I just took. I went out there and welded the muffler on just now. I know some of you may say that since the muffler is SS, I shouldn't have MIGed it to the aluminized piping. I had just spot welded it and planned on taking it to a pro to get TIGed on, but a couple other guys I talked to said that MIGing it will hold fine, just have to watch out for rust. But I don't care about that as is doesn't see winter, plus we're going to spray paint all the welds to help prevent that. So anyhow, here's some closer pics of my welds. Nothing award winning, but I think I'm getting better.
http://www.dsmstyle.com/gallery/albu...0107/weld3.jpg http://www.dsmstyle.com/gallery/albu...0107/weld1.jpg http://www.dsmstyle.com/gallery/albu...0107/weld2.jpg |
Re: Finished homemade piping setup.
And she's alive!!! One of the slim fans took a ---- right off the bat, so I gotta get a new one of those. Idle is a hair rough. But other then that, she's alive and noisy as hell! I think I have leaks between the flanges
|
Re: Finished homemade piping setup.
if it works it works. ---- doesnt need to be pretty. tc reppin hard :y
|
Re: Finished homemade piping setup.
TC is repp'n real hard.
Looks really good man, I think we'll have to have a meet soon and I think you'll have to give me a rid ;) Gotta love the 1g dsms though. My first experience in one was my buddy's fully built 1g, big 16g turbo, full 3" and what not. I love 6k rpm clutch drops. |
Re: Finished homemade piping setup.
Ya she's movin pretty good! This turbo is a little bigger then a 16g. I'd try to make it to a meet if there was one. But I work a crazy schedule. Now we just gotta get Austin's car turboed!!!
|
Re: Finished homemade piping setup.
Drove it to work today. Thing runs fine. Noisy from the exhaust, and needs an allignment. But other then that she seems to be holding great at 15psi. Tommorow I think I'll put her up to 20 and see how she pulls!!
|
All times are GMT -5. The time now is 10:55 AM. |
© 2024 MH Sub I, LLC dba Internet Brands