|
Re: Figured I'd post up this new goofy manifold I made.
Originally Posted by crxvtec91
Are you from turbod16? I think I have seen this before. I really like the way it looks. BTW How much are you selling it for?
|
Re: Figured I'd post up this new goofy manifold I made.
Yeah, I don't think it takes away at all. The end result and end purpose is for it to flow as well as possible. Visual symetry comes second in my opinion. The customer is happy with it, so I suppose that's all that counts.
The manifold was priced as a miniram, which I sell for 415 shipped with an ext gate. It'll be a nice build....good on the budget, and something he'll upgrade later. He has a sleeved block and will be going with a topmount later. |
Re: Figured I'd post up this new goofy manifold I made.
that manifold is baller hands down, someone needs to run a similar on a huge hp setup vs topmount 30ft of pipe setup
|
Re: Figured I'd post up this new goofy manifold I made.
how are you a sponser but there is ---- all in the sponser section from you ???
|
Re: Figured I'd post up this new goofy manifold I made.
Originally Posted by highroller54
how are you a sponser but there is ---- all in the sponser section from you ???
|
Re: Figured I'd post up this new goofy manifold I made.
Originally Posted by rc000e
You must be kidding.....
Guess you've never seen a miniram oil drain height. I reworked the jig specifically for the purpose of gaining oil drain height. There's over two inches there....if you can't make an oil drain work with that you have problems. Wastegate will go out the front middle using an el. My dogtag....has my company name, real name... Sorry bro. Not my style. Drain sux. Nothing personal, yet... and no im not kidding... I didnt say it wouldnt work, i didnt even flame you so shut the ---- up you ------- ---- bleeding ------. The manifold is sub par design IMO... If you dont like my opinion... I've done my job asswipe. Now, go make another one. :1 |
Re: Figured I'd post up this new goofy manifold I made.
Well, you have a right to your opinion certainly. I'm a little shocked your so critical, calling me a ---- and what not, given how undercut and burned the welds are on your topmount. I suppose your probably not gonna like my opinion either at this point.
I'm curious how you'd approach doing miniram style mani's with fairly large turbo's and gain any additional drain height than I've gotten here?
Originally Posted by highroller54
how are you a sponser but there is ---- all in the sponser section from you ???
|
Re: Figured I'd post up this new goofy manifold I made.
Originally Posted by rc000e
Well, you have a right to your opinion certainly. I'm a little shocked your so critical, calling me a ---- and what not, given how undercut and burned the welds are on your topmount. I suppose your probably not gonna like my opinion either at this point.
I'm curious how you'd approach doing miniram style mani's with fairly large turbo's and gain any additional drain height than I've gotten here? I've got quite a few orders right now, and I don't want to get overwhelmed. The banner does quite well on its own. I have analytics on my website, so I know where people are coming from. Actually: The fact that you retaliate like a sexually abused pre teen girl says something about your faggot ass... Duly noted to take into consideration in the future.... Quite sure im making more on my " burnt undercut fucked up" manifold than whoever you sell that thing will too... Welds are nice... I KNOW you only built one... I wouldnt buy one and id be willing to BET my manifold makes better power. Build a topmount for h22/GT40 for an Accord thats designed properly and Id buy a manifold from you. Just not that one.Bottom line is my ---- is PROVEN to be a VERY efficient setup, the manifold lengths/volumes were calculated before it was started. It makes ridiculous power... EVERYWHERE. Good luck. HOTREX OWNS YOU |
Re: Figured I'd post up this new goofy manifold I made.
Mini rams are nice for quick spool. Each manifold has its purpose. Drag car vs street car. Having a drag car powerband (gt40-topmount) would suck on the street. Sure it would be fun in some cases. But for the average consumer, they want power on tap.
Rc000e-Do you ever hit up Pittsburgh raceway park? Ive seen some pretty quick hondas there last season on test and tune nights. |
Re: Figured I'd post up this new goofy manifold I made.
Originally Posted by rc000e
Dont ever compare me to him. I've never had a manifold failure in my life, I don't take people's money, and I'm not a piece of ----. Like I said, a small piece of straight is the appropriate way to deal with a situation. I could've stretched the bend and elimated the gap, but flow quality overall suffers from cheater cuts. I chose to tangent cut it and add the piece. |
| All times are GMT -5. The time now is 09:01 AM. |
© 2024 MH Sub I, LLC dba Internet Brands