Dohc zc stock exhaust manifold fabbed into a turbo manifold
03-23-2009, 02:09 PM
#1
0.5 BAR
Thread Starter
Join Date: Jan 2009
Posts: 58
Dohc zc stock exhaust manifold fabbed into a turbo manifold
I am wondering if i can use a dohc zc exhaust manifold and switch the downpipe around and welding it up to be a top mount? I am putting it on a z6 motor but that shouldn't be a problem because the zc ports are larger than the d series ports though it does bolt up fine. I am just wondering if the cast manifold will hold up to the heat. Also i need to know if anyone has welded up a stock exhaust manifold other than the hf one.
Also once it is welded up i would just get a t3 flange welded to it and a custom downpipe. Thanks and hope to hear some good news
Also once it is welded up i would just get a t3 flange welded to it and a custom downpipe. Thanks and hope to hear some good news
03-24-2009, 12:22 AM
#5
0.0 BAR
Join Date: Feb 2009
Posts: 37
some ppl call it sinktrap cause it looks like a sinktrap the u bend (damn go look under your sink lol) but yes you can add a pice of tube like a U from the stock mani then u. if thats not what you mean then are you trying to turn the mani around 
:% idk
just go ebay cast
:% idk just go ebay cast
