HomemadeTurbo - DIY Turbo Forum - Chinese TIG welder owners (especially Smiley's) I need your help~!

Page 10 of 11

Show 40 post(s) from this thread on one page

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)

- Fabrication (https://www.homemadeturbo.com/fabrication-14/)

- - Chinese TIG welder owners (especially Smiley's) I need your help~! (https://www.homemadeturbo.com/fabrication-14/chinese-tig-welder-owners-especially-smileys-i-need-your-help%7E-89747/)

Scott-EP

08-14-2008 03:48 PM

Re: Chinese TIG welder owners (especially Smiley's) I need your help~!

ship it to me if its a tig

b18.	08-14-2008 03:50 PM

Re: Chinese TIG welder owners (especially Smiley's) I need your help~!

Quote:

Originally Posted by CSaddict

I havent tested anything. The welder is sitting in a pile of garbage on my floor in the basement.

Can I have it?

SpankedYA!

08-14-2008 04:03 PM

Re: Chinese TIG welder owners (especially Smiley's) I need your help~!

It would cost more in shipping than its worth.

buk9tp

08-14-2008 04:28 PM

Re: Chinese TIG welder owners (especially Smiley's) I need your help~!

gas solenoid pls?

b18.	08-14-2008 04:31 PM

Re: Chinese TIG welder owners (especially Smiley's) I need your help~!

Quote:

Originally Posted by CSaddict

It would cost more in shipping than its worth.

I'll ship?
8)

larry-gt

09-05-2008 08:56 PM

Re: Chinese TIG welder owners (especially Smiley's) I need your help~!

Replace as shown in the photos and it will work!

Toysrme

09-05-2008 11:25 PM

Re: Chinese TIG welder owners (especially Smiley's) I need your help~!

no it wont or CS would have already fixed it!

SpankedYA!

09-06-2008 12:11 AM

Re: Chinese TIG welder owners (especially Smiley's) I need your help~!

I changed the entire board. It still is a no go. I dont really care. It served its time well. I paid for itself 10 fold.

buk9tp

09-06-2008 12:47 AM

Re: Chinese TIG welder owners (especially Smiley's) I need your help~!

bypass the solenoid and just use the regulator to turn your gas on. That's what I ended up doing :1 Solid gas coverage :8

larry-gt

09-06-2008 08:15 AM

Re: Chinese TIG welder owners (especially Smiley's) I need your help~!

Quote:

Originally Posted by CSaddict

I changed the entire board. It still is a no go. I dont really care. It served its time well. I paid for itself 10 fold.

This was a very common problem with the Mitech produced machines, I'll bet the board you replaced it with had the same problem.

Good luck anyway, just thought I'd try and help.

All times are GMT -5. The time now is 02:34 PM.

Page 10 of 11

Show 40 post(s) from this thread on one page