Re: changed out my cat with a high flow
my friend did that......CA didnt like it one bit.....
|
Re: changed out my cat with a high flow
i used to punch the straight pipe through the cat and weld on the flanges. This way if one of the Jersey side-of-the-road inspection stations decided to pull you in, it still looks like you have a cat under there and you avoid an expensive fine.
|
Re: changed out my cat with a high flow
NA catless 4 cyl sounds terrible.
|
Re: changed out my cat with a high flow
Originally Posted by scottsi
NA catless 4 cyl sounds terrible.
|
Re: changed out my cat with a high flow
should have added a cherry bomb.
|
Re: changed out my cat with a high flow
just take your original car off and cut a hole in the top, remove insides, weld top back on. home made resonator.
|
Re: changed out my cat with a high flow
here is what it sounds like inside and i'm not pushing it w.o.t.
http://s29.photobucket.com/albums/c2...8-VID00002.flv |
Re: changed out my cat with a high flow
Fail. And g35/350z's sound like ----. They are toneless drones. Crack the throttle and they go "murrrrrr" weaksauce.
|
Re: changed out my cat with a high flow
I'm up for just the hatching out the honeycombs. That way you still have the "look" of a cat. If not take off the heat shields and tack weld the two pieces over the pipe.
|
Re: changed out my cat with a high flow
so rocks and road debris can rattle around in there? ---- that.
|
All times are GMT -5. The time now is 11:24 AM. |
© 2024 MH Sub I, LLC dba Internet Brands