HomemadeTurbo - DIY Turbo Forum
Page 3 of 6
1
2
3
4
5
6
Show 40 post(s) from this thread on one page

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Fabrication (https://www.homemadeturbo.com/fabrication-14/)
-   -   CBR1100 motor into a EF chassis? (https://www.homemadeturbo.com/fabrication-14/cbr1100-motor-into-ef-chassis-62788/)

hotrex 07-27-2006 11:20 AM
Re: CBR1100 motor into a EF chassis?
 
its a lame idea plain and simple. a boosted d series would walk all over it.

jinxy 07-27-2006 12:02 PM
Re: CBR1100 motor into a EF chassis?
 
This idea is down right retarded. You would spend less on a b series, have more displacement, torque, horsepower , and you could back out of a parking spot by using reverse. Unless you machine the ---- out of the side of the engine and crank for it to accept a flywheel and a normal honda trans, or whatever trans tickles your fancy. It might be alittle difficult to drive that car.

sakpase 07-27-2006 12:36 PM
Re: CBR1100 motor into a EF chassis?
 
Originally Posted by rawr
, and you could back out of a parking spot by using reverse. It might be alittle difficult to drive that car.
LMAO that's funny ---- didn't think about that one. A honda GoldWing has reverse.

Reddy 07-27-2006 01:12 PM
Re: CBR1100 motor into a EF chassis?
 
Originally Posted by stillnoturbo
A bike engine in a fwd would be too much work just to have the hp numbers of around a z6 and the torque of tug of war match with a infant.
A hayabusa has the same torque and a shitton more power and potential than a Z6 ::)

absolutezroo 07-27-2006 05:23 PM
Re: CBR1100 motor into a EF chassis?
 
http://video.google.com/videoplay?do...59502945869301 185bhp 105ft/lbs i'd say thats better then your "average" d

iceracercrx 07-27-2006 06:13 PM
Re: CBR1100 motor into a EF chassis?
 
I know the SCCA d and c sports racer (prototype looking cars) have R1 and 1300 cc motors in them. They eat up clutches like crazy and they are only 850 pounds. But they also push them through the air at 160+mph, which is hard on needs. Cool idea but weight is everything.

Randy

the_visualist 07-27-2006 08:23 PM
Re: CBR1100 motor into a EF chassis?
 
Originally Posted by rawr
This idea is down right retarded. You would spend less on a b series, have more displacement, torque, horsepower , and you could back out of a parking spot by using reverse. Unless you machine the ---- out of the side of the engine and crank for it to accept a flywheel and a normal honda trans, or whatever trans tickles your fancy. It might be alittle difficult to drive that car.
Exactly what I was thinking, no reverse. That's really the only problem I can foresee that's not "easy" to overcome. Also, why an ef? Why not a cvcc or 3rd gen civic/1st gen rex? All said and done, it's not really my cup o' tea, though I must admit I have thought about a similar idea, and decided it wouldnt be worth it. Just put all the time and money in to a turbo b series or something. Better yet, turbo an NSX engine and stick it in an EF O0

bigdaddyvtec 07-27-2006 08:31 PM
Re: CBR1100 motor into a EF chassis?
 
If you have the motor... Build a shiftercart... ANd pee yourself everytimer you hit the gas!!!

Slo_crx1 07-27-2006 09:43 PM
Re: CBR1100 motor into a EF chassis?
 
Originally Posted by bigdaddyvtec
If you have the motor... Build a shiftercart... ANd pee yourself everytimer you hit the gas!!!
----...I used to have a shiftercart with a 250r motor...that alone would make you ---- yourself ;D

bigdaddyvtec 07-27-2006 09:47 PM
Re: CBR1100 motor into a EF chassis?
 
Originally Posted by slo_crx1
----...I used to have a shiftercart with a 250r motor...that alone would make you ---- yourself ;D
Ya a friend of mine had one with one of those old 3 cyl 2stroke kawasakis iin it----- INSANE, i didnt pee ....but i was wet (and a bit shaken)....


All times are GMT -5. The time now is 09:13 PM.
Page 3 of 6
1
2
3
4
5
6
Show 40 post(s) from this thread on one page


© 2024 MH Sub I, LLC dba Internet Brands