HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Fabrication (https://www.homemadeturbo.com/fabrication-14/)
-   -   Body Mods (https://www.homemadeturbo.com/fabrication-14/body-mods-101551/)

geofarace 04-15-2009 12:10 AM

Body Mods
 
So again new guy here for any info?I was unsure where to post this exactly but anyway like I said I have a 93 metro and I would like to know if you crx/civic guy know if it the frt bumpers off the hondas would fit my metro..if anyone has a old cheap frt bumper that is aftermarket that is close or just CHEAP S/H..??post it

geofarace 04-15-2009 10:48 PM

BUMP BUMP

geofarace 04-22-2009 11:03 PM

BUMP??

blackice90hb 04-23-2009 12:12 AM

WTF has this site gone to? Look, dude, its obvious you have done zero reseach, have no ------- idea about anything with cars, and that you have no common sense what so ever... What the ---- makes you think anything Honda, or anything Non Geo/GM would even work tih your ----? And what dumbass would even care to find out?

I dont even care to go anymore into it. See how many of these newbie clowns here can fit in the back of your 3 cylinder econobox, then proceed to drive of a cliff. Thanks.

BRIAN MP5T 04-23-2009 06:43 AM

Here, Body mod..

It's the super thin Civic Mod, +200 WHP

https://www.sfgate.com/c/pictures/20...rods_la102.jpg

silvertc 04-23-2009 11:02 AM

is this a fuc*ing joke? a geo? seriously gtfo

geofarace 04-23-2009 11:34 AM

Look mother-fucker this is a place to recieve help with mods HOME MADE TURBO you DUMBASS..I have took some honda strur bars and the fiited with some work and the older crx's body lines are a close fit..anyway you ------- dumbass its not what buy its what you Build... I may not be able to beat you on the strip with my turbo 3 cylinder but I'll still get 30+ MPG... and about the body kits the only companys that do have body kits for these cars are in aust. and england.. and ther over $100usd +s&h so if I can make a cheap ass ebay kit for a crx then so be it..I'm also a universal technical insutute grad so ---- YOU!!!

BRIAN MP5T 04-23-2009 12:12 PM

Dude, It's HOME MADE TURBO

Not...

"I'm a ------- HOMO and want to put a body kit on my Hunk Of ---- CAR" Forum

silvertc 04-23-2009 02:35 PM


Originally Posted by geofarace (Post 1267179)
Look mother-fucker this is a place to recieve help with mods HOME MADE TURBO you DUMBASS..I have took some honda strur bars and the fiited with some work and the older crx's body lines are a close fit..anyway you ------- dumbass its not what buy its what you Build... I may not be able to beat you on the strip with my turbo 3 cylinder but I'll still get 30+ MPG... and about the body kits the only companys that do have body kits for these cars are in aust. and england.. and ther over $100usd +s&h so if I can make a cheap ass ebay kit for a crx then so be it..I'm also a universal technical insutute grad so ---- YOU!!!

universal technical insutute grad? yeah its showing you can't spell and you drive a Geo? i would get my money back where ever you paid to get your education.:rolleyes:

ef4dr 04-23-2009 03:30 PM

this thread is nothing but fail haha

geofarace 04-23-2009 04:57 PM

ok ---- yall I was in a rush to spell and I have a custom bult 79 yota 4x4 on 35's with a chevy 1ton axle swap,I have a 79 gmc 3/4ton 4x4 with a dana 60 in the front and a 14 bolt in the back with some 44'' boggers,with a built 500CI caddy motor and perfect bodys and run the hell out of them any day?? A friend gave me the geo for FREE so WTF why not do something diffrent,and for the dumass that said Home made turbo is for that use only then why the ---- are you jackoffs got adult only forum and general disscussion forum,that has nothing to do with turbo ----??

BRIAN MP5T 04-23-2009 05:44 PM


Originally Posted by geofarace (Post 1267233)
ok ---- yall I was in a rush to spell and I have a custom bult 79 yota 4x4 on 35's with a chevy 1ton axle swap,I have a 79 gmc 3/4ton 4x4 with a dana 60 in the front and a 14 bolt in the back with some 44'' boggers,with a built 500CI caddy motor and perfect bodys and run the hell out of them any day?? A friend gave me the geo for FREE so WTF why not do something diffrent,and for the dumass that said Home made turbo is for that use only then why the ---- are you jackoffs got adult only forum and general disscussion forum,that has nothing to do with turbo ----??

Dude, It's a GEO... Even when it was new, it was a piece of ----...

I don't give a ---- what other cars you may or may not have... You are talking about putting the front of a civic on your ------- GEO...

What the ---- is wrong with you...

geofarace 04-23-2009 08:11 PM

Ok my ------- bad ok there are more than honda cars they may fit but thats why I'm asking about it!!!

BRIAN MP5T 04-23-2009 09:15 PM

Waa Waa Waa..

Why not stick the front of a 300C to your car...




and while yer at it, Get rid of the car...

geofarace 04-23-2009 09:26 PM

HATER!!!!!

blackice90hb 04-23-2009 10:32 PM


Originally Posted by geofarace (Post 1267266)
I SUCKED MY UNCLES DICK TO GET HIS LIFTED TRUCKS AND CHEATED MY WAY THROUGH COMMUNITY COLLEGE AUTO MECHANICS!!!!!





f
a
i
l
U
R
E

geofarace 04-23-2009 10:50 PM

Look Stupid.... I am really sorry that you dont know a ------- thing about cars yourself obviously and thats the reason that you feel that you have to say something to me but in my opinion you just look like an ignorant ------- dumbass that feels like the only way to get out of a question that you dont know the answer to is to be an ass hole.. oh yes and I'm sorry if nobody will accept that your a homo thats what im assuming since you are the one who brought it up, right?

mitsubishi98gs 04-23-2009 11:05 PM

Hey i have seen that super thin civic in Rialto and I remember hearing about it getting crushed. Geos are for fags just so everyone knows!!!!!!!

tkelly278 04-24-2009 12:05 AM

1 Attachment(s)
Here is my MS paint rendering of the things you can do to the geo, mind you this is on the wagon, it was the first image to show up on google. As far as paint goes, I think a custom job with a rattle can would be totally you. You can see the giant penis shooting jiz in your face on the hood, that may be much, but fagmobile down the side is highly recommended.

The side mount IC will keep the air velocity up, while the 13" spinners will keep the car's velocity down, so you don't hurt yourself with the powah. Cold air intake and chicken wire are a must for big hp.

On a serious note, why don't you keep it stock so it will be a sleeper? Or take the dremel to the stock one, how could you make it look worse than a geo? Actually, rip it the ---- off, rip everything that isn't structural off. To be a sleeper it has to be fast.

cpederson 04-24-2009 12:11 AM

i liek teh super thin civic

locivichatchback 04-24-2009 01:00 AM

ha ha ha i love hmt this guy talks about he put axle in, put a bigger motor in a truck.....roflmao.....but didn't mention what gearing did the axle have in the 4x4 that does make a difference....and putting a civic front end on a geo.... lmao.....that would be like putting a bentley front end on a fiat....my opinion sell the car to the junk yard hell they will give you 50 bux for it and buy a civic..i mean damn my d16z6 motor with no turbo makes more hp than your turbo 3 cylinder engine .....lmao.....i have a headache now laughing so hard

geofarace 04-24-2009 09:38 AM

well I figured this would make ya sick then..but.... YouTube - K20 GEO METRO ..........its badass anyway... YouTube - 9 second Geo Metro ....anyway its what you build!!

geofarace 04-24-2009 10:02 AM

here we go.. GaragePWR :: TURBO GEO PROJECT remix by Autoworks - Photobucket ...

mitsubishi98gs 04-24-2009 11:52 AM

Build it however you want it will stull be a fagmobile wether its fast or not!!!!!!!!

BRIAN MP5T 04-24-2009 02:43 PM

5 Billion WHP GEO FAGMOBILE!!!

txdohczc 04-24-2009 02:49 PM

dude im pretty sure you dont even have a nineth grade education, let alone some degree for some ----. you dont own a chevy and and your geo is not turbo. shut the ---- up you suck cock your a ------- troll and have no life so you want people to think your cool becuase you have a civic bodykit on your geo. bodykits are gay and so are geos. so with all that being said eat a dick and ---- your self you piece of ----

locivichatchback 04-24-2009 04:42 PM

lol eat a dick hell man he's already did that....geofarace sorry but when somebody just gives you car like that...you should have thought then what was going to said about it....and a k20 in a geo metro lets see the motor is worth way more than the car alone so it's just stupid...but everybody has opinions and no a civic front end will not work on a geo metro...the civic is about 3 inches wider than a metro

geofarace 04-24-2009 08:34 PM

First of all I think that somebody may need to come out of the closet... You talk an awful lot about fags and homosexuality...;) I have come to the conclusion that you all are fags and obviosly have no ------- lives. Sorry your shity little lives had to turn out that way.:( Anyway I know that you may not like my car but I really dont give a ---- and you all have to have good looking cars because its an extention of your little ass dicks..:o So all I have to say to you is you can do what you have been talking about soo soo much and go suck a dick and choke on it,because I,m sure that it'll curve your urge to talk about sucking cock so much or maybe all you faggot ass fuckers can get together and do it for each other.HA!HA! Now who's laughing quere? Me!...Oh yes and for the homo that drives the Mitsubishi.....Thats what my wife drives... Ohhhh wow looks like you got a bitch car... Sorry fag:p

racingbrett 04-24-2009 08:38 PM

will they fit? anything will fit onto/into anything it just depends how much effort n fiber glass matting u want to throw at it

BRIAN MP5T 04-24-2009 08:59 PM

It's not that we do or do not like the car..

YOU ARE ASKING ABOUT BODY KIT ---- ON A REDNECK TURBO FORUM.

YOU = FAIL

geofarace 04-24-2009 09:10 PM

Well I'm sorry for asking about the body kit ---- but thanks for the help..and I am working on putting a turbo on the 3banger I plan on cutting the stock mani and welding an adapter to the manifold that fits the turbo I found.. I consider myself a redneck and I'm just as poor as yall cause I have 2 girls and a wife sooo...Thanks

BRIAN MP5T 04-24-2009 09:13 PM

Why not cut the car in half and ride the bus.. Most of them have turbos...

geofarace 04-24-2009 10:23 PM

LMAO :)

mitsubishi98gs 04-24-2009 11:03 PM

For the dumb ricer fagit who wants a gay body kit on his shitty ass GEO your wife drives a nice car to bad you dont unless you got all rice happy on it also. If I was yor ass id sell my geo and by a ------- bicycle and put a little horn and a basket and some streamers on the handle bars.

DSM

BRIAN MP5T 04-25-2009 01:08 AM

Dude, even peeps with 3 Posts think yer a Fag...

blackice90hb 04-28-2009 06:28 PM


Originally Posted by geofarace (Post 1267273)
Look Stupid.... I am really sorry that you dont know a ------- thing about cars yourself obviously and thats the reason that you feel that you have to say something to me but in my opinion you just look like an ignorant ------- dumbass that feels like the only way to get out of a question that you dont know the answer to is to be an ass hole.. oh yes and I'm sorry if nobody will accept that your a homo thats what im assuming since you are the one who brought it up, right?

Your an idiot.

Beatfreak.123 04-28-2009 08:49 PM

Wow! This tread so far made me laugh my ass off so far. Personally i dont see the point in giving all the effort of fitting a honda front end on a damn geo shitbox that cant even make it look like it had the chance of looking better.
PLEEAASE, at least make it a sleeper.

geofarace 04-28-2009 09:15 PM

3 Attachment(s)
Thanks for the help anyway but I just found a used suzuki swift gti body kit shipped to the house for $200 bucks...just needs some body work.. Nice guy sold the kit for $25+S&H=200

Nexus1155 04-28-2009 09:19 PM

You paid $200 on a god damn bumper when you could've fiberglassed your own and molded it from cardboard and greatfoam yourself for under $100 and have it look as custom as you wanted .... THIS IS HMT, GO TO LIKE GEOOWNERS.com or something holy ---- no offense but ---- dude what a waste of money.....This has to be a joke post by this guy or something or someone just being having a good laugh

geofarace 04-28-2009 09:28 PM

Well the only reason it cost that much is because it came from NY the shipping was $180 bucks and I'm not a great fiberglass man I can only mold the bumpers and fenders where there aint no lines Sorry...and I like the look of them besides someone is buying my front and back bumpers for $75 bucks anyway!


All times are GMT -5. The time now is 07:25 PM.


© 2024 MH Sub I, LLC dba Internet Brands