B18b ramhorn manifold
 

i made this out of an old ford racing manifold for a focus that i got off a freidn for a tank of gas for his mach 1 when it was costing $3/gallon
http://i5.photobucket.com/albums/y17...05-07_0008.jpg
Attachment 29922
Attachment 29923
Attachment 29924
my welding could be better, but it's for me, doesn't need to look good to go fast
http://i5.photobucket.com/albums/y17...15-07_1324.jpg
mad tyte yellow valve cover
took only about 4 hours of total work inculding ------- up once because i was fiddling around with wastegate placement.

as a side note check out what a search for 'turbo' gets you on altavista.
http://www.altavista.com/image/resul...=all&miwxh=all

Re: B18b ramhorn manifold
 

that metal looks paper thin :-\

good luck not getting creep with that WG elbow..

Re: B18b ramhorn manifold
 

thickness should be fine, it's not aluminum foil
only option i had as far as where to put the wastegate.
thanks for the optimism.

Re: B18b ramhorn manifold
 

Git r dun.Should work them grade A HMT sexy welds add at least 10hp O0

Re: B18b ramhorn manifold
 

apparently you havent paid much attention to how easy ssac manis break, and their metal is about as thick as that....

good luck with it

Re: B18b ramhorn manifold
 

we will have to see than, i guess you don't hold much hope for ford, i can understand.
it's made from tempered steel which is studier than the galvanized piping i used. i am confident that my welds will hold. my only further plan for it is to go at it with a die grinder to smooth all transitions to eleminate hot spots.

Re: B18b ramhorn manifold
 

get a 90 degree bend and replace the right angle to the wastegate.

Re: B18b ramhorn manifold
 

it works and you got less than $100 in it thats good

Re: B18b ramhorn manifold
 

Looks tits!! Rock it till it falls of......the weld it back up! :P

Re: B18b ramhorn manifold
 

Looks good. You get a bannana sticker!