HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Fabrication (https://www.homemadeturbo.com/fabrication-14/)
-   -   anybody done like a sidewinder turbo manifold for a ef (https://www.homemadeturbo.com/fabrication-14/anybody-done-like-sidewinder-turbo-manifold-ef-94982/)

btlfed 09-02-2008 10:54 PM

anybody done like a sidewinder turbo manifold for a ef
 
ok dont be bitch's i just know that top mounts make hella power was wondering if like a sidewinder like that u do on a k series would make good power on a b series kinda put the turbo over the tranny,any ideas or pics would be good.

the 13th round 09-03-2008 03:40 AM

Re: anybody done like a sidewinder turbo manifold for a ef
 
learn how to type.

splog FTMFW. this isnt HT, noone here cares how long your pipes are.

sidewinder, hahaha, go ------- stroke a crocodile.

buk9tp 09-03-2008 12:24 PM

Re: anybody done like a sidewinder turbo manifold for a ef
 
https://www.homemadeturbo.com/turbo_...gine-bay_P.jpg

gon3r 09-03-2008 03:20 PM

Re: anybody done like a sidewinder turbo manifold for a ef
 

Originally Posted by the 13th round
splog FTMFW. this isnt HT, noone here cares how long your pipes are.

sidewinder, hahaha, go ------- stroke a crocodile.

pull your head out of your ass... jeff frank ran a sidewinder years and years ago as jay already posted.

bigdaddyvtec 09-03-2008 03:24 PM

Re: anybody done like a sidewinder turbo manifold for a ef
 

Originally Posted by btlfed
ok dont be bitch's i just know that top mounts make hella power was wondering if like a sidewinder like that u do on a k series would make good power on a b series kinda put the turbo over the tranny,any ideas or pics would be good.


Go get fucked by an AIDS POLE in your AIDS hole..... The only bitch in this thread is you... faggot

btlfed 09-03-2008 11:06 PM

Re: anybody done like a sidewinder turbo manifold for a ef
 
wow thanks guys god dam yall are a bunch of ------- assholes just asking question so ---- off

and thanks for the pic

Scott-EP 09-03-2008 11:21 PM

Re: anybody done like a sidewinder turbo manifold for a ef
 

Originally Posted by btlfed
wow thanks guys god dam yall are a bunch of ------- assholes just asking question so ---- off

and thanks for the pic

its a waste, thats why you are getting ----. other than H-T bling, there are no advantages to it

stillnoturbo 09-04-2008 12:03 AM

Re: anybody done like a sidewinder turbo manifold for a ef
 
Oh the built ZC... only the good die young.

btlfed 09-04-2008 07:57 PM

Re: anybody done like a sidewinder turbo manifold for a ef
 
ok i was just wondering, thought it might make more room so i can keep my full radiator

SpankedYA! 09-04-2008 08:46 PM

Re: anybody done like a sidewinder turbo manifold for a ef
 
You sucks and so does this thread.

txdohczc 09-05-2008 01:45 AM

Re: anybody done like a sidewinder turbo manifold for a ef
 
thats a good idea. buy a $600-700 manifold to keep you shitty radiator that can be replaced for less than $300 (way less if you do not care about quality). your an idiot go ---- your dad

miss-piggy 09-05-2008 10:15 PM

Re: anybody done like a sidewinder turbo manifold for a ef
 
There are a lot of reasons to run sidewinder manifolds.

1) Wastegate placement
2) Downpipe size
3) AC and PS compatability
4) Runner length

In the end, I'd rather have a $100 CDM cast manifold but there are reasons to go with a sidewinder manifold.

onlyflash944 09-05-2008 10:36 PM

Re: anybody done like a sidewinder turbo manifold for a ef
 

Originally Posted by bigwig

In the end, I'd rather have a $100 CDM cast manifold but there are reasons to go with a sidewinder manifold.

aids?

the 13th round 09-06-2008 03:48 AM

Re: anybody done like a sidewinder turbo manifold for a ef
 

Originally Posted by onlyflash944
aids?

hahhaahahh

akurtzer57 09-07-2008 02:10 AM

Re: anybody done like a sidewinder turbo manifold for a ef
 
Reason I went with it. V6 run a single turbo equal lenght, ,avoid custom motor mounts for my situation. Easy for down pipe, plenty of room other wise would have big whole where stock intake was. Also wastegate placement. I see exactly where he is coming from it all depends what kind of room he has such as some people foreced to run a RMT setup.
http://uploader.ws/upload/200809/untitled_10.jpg



btlfed 09-07-2008 07:00 PM

Re: anybody done like a sidewinder turbo manifold for a ef
 
well i have a buddy that builds bad ass manifolds and ---- and was looking at his on his k20 and just love how it looks and performs on his, thouight it might work out hard core on mine and i already have a alum 3 core half rad also

txdohczc 09-07-2008 07:09 PM

Re: anybody done like a sidewinder turbo manifold for a ef
 
well your setup and powergoals is whats going to dictate whether or not to get a sidewinder

boost-addict 09-07-2008 08:01 PM

Re: anybody done like a sidewinder turbo manifold for a ef
 
1 Attachment(s)
yes

btlfed 09-08-2008 06:25 PM

Re: anybody done like a sidewinder turbo manifold for a ef
 
well im sending my block off to get sleeved by golden eagle and i got eagle rods and crank,still cant decide on pistons got victor x manifold 74mm tb 1000cc rc injectors all arp bolts new everything every gasket ---- like that,tial wastegate and bov might run dual wastegates,full crane ignition, got a quaife all braided fuel line from front to back aeromotive fuel pump, cheap fuel rail bored out to flow hella good. got nitrous hooked up to kick off when it hits like 4 pounds of boost,get me off the line hard. prob forgetting a bunch of ---- but i am wanting this dam thing to ------- roll the fuc k out hmt style look like a ------- turd but haul balls,when i busted my tranny i got out and kicked the ------- door in so its not looking the best right now,haha its all red but like 4 diff reds ---- it

Walter 09-08-2008 06:39 PM

Re: anybody done like a sidewinder turbo manifold for a ef
 

Originally Posted by boost-addict
yes

do you have more pics?

onlyflash944 09-08-2008 06:58 PM

Re: anybody done like a sidewinder turbo manifold for a ef
 

Originally Posted by btlfed
well im sending my block off to get sleeved by golden eagle and i got eagle rods and crank,still cant decide on pistons got victor x manifold 74mm tb 1000cc rc injectors all arp bolts new everything every gasket ---- like that,tial wastegate and bov might run dual wastegates,full crane ignition, got a quaife all braided fuel line from front to back aeromotive fuel pump, cheap fuel rail bored out to flow hella good. got nitrous hooked up to kick off when it hits like 4 pounds of boost,get me off the line hard. prob forgetting a bunch of ---- but i am wanting this dam thing to ------- roll the fuc k out hmt style look like a ------- turd but haul balls,when i busted my tranny i got out and kicked the ------- door in so its not looking the best right now,haha its all red but like 4 diff reds ---- it


aids?

txdohczc 09-08-2008 09:05 PM

Re: anybody done like a sidewinder turbo manifold for a ef
 
definitly aids

btlfed 09-08-2008 09:44 PM

Re: anybody done like a sidewinder turbo manifold for a ef
 
dam why full blown aids and not the hiv

akurtzer57 09-09-2008 12:24 AM

Re: anybody done like a sidewinder turbo manifold for a ef
 
so your spending like 8k on a motor and don't know about different setups and their pros and cons? :1 Sound like someone I know and says hes doing all this stuff to his car and when he works on it its worse than it was before but yet is the greates mechanic and know it all. That can tell me off and say mine setup is wrong and won't work when he can't even figure out a little motor knock. (honing out cyl to much can cost piston slap-hone cyl 2 times within 500miles)

boost-addict 09-09-2008 08:05 PM

Re: anybody done like a sidewinder turbo manifold for a ef
 
1 Attachment(s)

Originally Posted by Walter
do you have more pics?


1 more :D

i'm going to sell this one tough

Walter 09-10-2008 07:26 PM

Re: anybody done like a sidewinder turbo manifold for a ef
 

Originally Posted by boost-addict

1 more :D

i'm going to sell this one tough

how much? i'd like to see one pic when looks completely engine bay of that car.

boost-addict 09-11-2008 12:55 PM

Re: anybody done like a sidewinder turbo manifold for a ef
 

Originally Posted by Walter
how much? i'd like to see one pic when looks completely engine bay of that car.

sent you a pm 8)

Walter 09-11-2008 06:40 PM

Re: anybody done like a sidewinder turbo manifold for a ef
 
awesome thx!

nascarfan 09-11-2008 06:52 PM

Re: anybody done like a sidewinder turbo manifold for a ef
 
http://bear-ytales.net/Sierra_Sidewi...der%20(16).JPG

txdohczc 09-11-2008 07:08 PM

Re: anybody done like a sidewinder turbo manifold for a ef
 
1 Attachment(s)
this is the only picture of a sidewinder in an ef i have,but i dont know if this is what you are looking for Attachment 14661

boostedhfrex 09-13-2008 10:38 AM

Re: anybody done like a sidewinder turbo manifold for a ef
 

Originally Posted by btlfed
ok i was just wondering, thought it might make more room so i can keep my full radiator

faggotry

boost-addict 09-13-2008 10:41 AM

Re: anybody done like a sidewinder turbo manifold for a ef
 

Originally Posted by btlfed
ok i was just wondering, thought it might make more room so i can keep my full radiator

do you fail at seeing my pictures??

btlfed 09-13-2008 07:50 PM

Re: anybody done like a sidewinder turbo manifold for a ef
 
just noticed the pics most of the time i have to check this ---- on my ------- phone, i will admit i dont know everything about turbos and diff set ups thats pretty much why i read around on this site bc u guys have done everytyhing there is to do almost so i ask what u guys got out of what u have done to see what i want to run i have always been an all motor d series guy,yes i know stupidest thing ever but, kinda liked to be there under dog. but

FrodoGT 09-18-2008 05:47 AM

Re: anybody done like a sidewinder turbo manifold for a ef
 
I saw one on a d16 that I thought was totally badass. But hell if I can find the picture now. I liked it better than the zc above because the downpipe was meant to go down to an exhaust so the turbo wasnt as far over and it had a different orientation that had perfect wg placement as well, was just about the sickest manifold ive ever seen on a D

boost-addict 09-18-2008 06:47 PM

Re: anybody done like a sidewinder turbo manifold for a ef
 

Originally Posted by FrodoGT
I saw one on a d16 that I thought was totally badass. But hell if I can find the picture now. I liked it better than the zc above because the downpipe was meant to go down to an exhaust so the turbo wasnt as far over and it had a different orientation that had perfect wg placement as well, was just about the sickest manifold ive ever seen on a D

where do you think my downpipe go's? ow wait,it's connected to my exhaust.

FrodoGT 09-19-2008 03:47 AM

Re: anybody done like a sidewinder turbo manifold for a ef
 
Thanks smart ass.. that pic up top shoots straight out the fender.

turbocivic6776 09-20-2008 04:53 PM

Re: anybody done like a sidewinder turbo manifold for a ef
 
if you know what your looking at you would see that that goes to the intake filter and the exhaust goes out the right side and back to the rear of the car :1

FrodoGT 09-21-2008 05:33 AM

Re: anybody done like a sidewinder turbo manifold for a ef
 
WTF are you smoking man? Intake filter? There aren't even any pipes on the car in that picture. Maybe you mean the turbo goes to near where the stock airbox used to be, which is kinda true.. but the downpipe clearly runs through the hole previously used for the resonator...and exactly where are you gonna route that back to the rear of the car from? You gonna go through the tire? Maybe over the LCA...yeah thats right.

turbocivic6776 09-21-2008 09:06 AM

Re: anybody done like a sidewinder turbo manifold for a ef
 
i thought u meant the last picture posted ^-^

jinxy 09-21-2008 10:03 AM

Re: anybody done like a sidewinder turbo manifold for a ef
 

Originally Posted by FrodoGT
WTF are you smoking man? Intake filter? There aren't even any pipes on the car in that picture. Maybe you mean the turbo goes to near where the stock airbox used to be, which is kinda true.. but the downpipe clearly runs through the hole previously used for the resonator...and exactly where are you gonna route that back to the rear of the car from? You gonna go through the tire? Maybe over the LCA...yeah thats right.

out the fender, along the kick panel back under the car and out the rear, like a man.


All times are GMT -5. The time now is 09:40 PM.


© 2024 MH Sub I, LLC dba Internet Brands