Re: AHHHHHHH Help me with welding!
Originally Posted by Minor Threat
Clean. Turn up the heat, slow down the wire. It's 90% prep work, 10% welding.
|
Re: AHHHHHHH Help me with welding!
Because he also said it was sloppy. 9 times out of 10 when I've worked with fluxcore, sloppiness was because I didn't have the heat up enough. If he's burnign through pipe, he's just moving too slow.
|
Re: AHHHHHHH Help me with welding!
fluxcore owns
|
Re: AHHHHHHH Help me with welding!
I pwn with fluxcore. Ya'll have seen my welds bitches 8) I say, turn teh heat lower, and play with wire speed until you get it flowing right. You generall ymove in a crecent moon shape as you see the metal turning red. Another way to determine how fast to move is how fast the wire is coming out the end (assuming you have it set up correctly to melt the wire).
|
Re: AHHHHHHH Help me with welding!
Its hard to weld thin pipe too start off. I would get some thicker scrap metal and practice laying some beads. Nothing pisses me off more then burning a hole in pipe, im very impatient and just want to pull the trigger and go :y
|
Re: AHHHHHHH Help me with welding!
I recommend welding without a mask
|
Re: AHHHHHHH Help me with welding!
Originally Posted by chris
I recommend welding without a mask
|
Re: AHHHHHHH Help me with welding!
Originally Posted by Blahman240
Yea... if I wanna melt my contacts and be blind.
|
Re: AHHHHHHH Help me with welding!
flash burns pwn :o
|
Re: AHHHHHHH Help me with welding!
yea go with the gas. and you could try the zig-zag motion, or try doing really little loops.
matt |
All times are GMT -5. The time now is 10:03 AM. |
© 2024 MH Sub I, LLC dba Internet Brands