Adding external gate to the Squarefold
02-13-2007, 12:10 AM
#21
1.0 BAR
Thread Starter
Join Date: Sep 2005
Posts: 599
Re: Adding external gate to the Squarefold
Originally Posted by SinisterCRX
This thing will be around until the end of time. Most SSAC manifolds will probably last a quick trip down the road.
02-13-2007, 10:42 AM
#25
1.5 BAR
Join Date: May 2005
Posts: 840
Re: Adding external gate to the Squarefold
Originally Posted by ChevyIIMan
Correct Im talking about a 4cyl SVO 2.3L so not much bigger then a Honda...
What it run now...low 9's at 3000# or so. lolLater
Randy
02-13-2007, 02:16 PM
#29
0.0 BAR
Join Date: Dec 2002
Posts: 0
Re: Adding external gate to the Squarefold
Originally Posted by SDRAWKCAB
^^^mabe in the 8th most 9 seconds car use side and top mount...or mabe im wrong :1
02-13-2007, 02:43 PM
#30
3.0 BAR
Join Date: Jul 2006
Posts: 2,349
Re: Adding external gate to the Squarefold
Originally Posted by chris
Your wrong. The top mount thing didnt start till a couple years ago. A close friend of mine went 9.40 on a log manifold,,84mm b16a and in 2000. In that era log manifolds or cast via rev hard was what most 9-10 sec cars repped. Really it comes down to spool time but if your launcing at 9000 and staying above 6000 the whole time it doesnt make a damn bit of difference.
