4age 20v turbo intake plenum...
 

i googled this and searched ebay at least 15 times... I DONT KNOW WHERE ELSE TO GO!

have any of the members/fabricators on this site made one of these before? anybody know where i could find one? maybe a kit that i could put together?

any help would be awesome!

Re: 4age 20v turbo intake plenum...
 

Ummmm have you tried club4ag.com? What do you need to do to it? Have the inlet on the other side? What exactly are you asking? ??? Is this in a FWD rolla or a RWD?

Re: 4age 20v turbo intake plenum...
 

i looked on club4ag as well but came up with nothing. maybe i didnt look hard enough though.

i am adding the ITBs to my turbo setup and i need a custom plenum made for my rwd setup since the stock 20v airboxes are said to leak boost.

there were a couple on ebay a month or so ago... but obviously not anymore.

Re: 4age 20v turbo intake plenum...
 

I have a stock 20V one but I'm not gonna sell it. Are you looking for the aftermarket plenum for the 20V ITB for turbo? The company that sells it on ebay is from thailand I saw that one before they also sell supra plenums try searching the seller on ebay.

Re: 4age 20v turbo intake plenum...
 

get some one to copy the stock one in one solid piece.

Re: 4age 20v turbo intake plenum...
 

I made one for a 16v 4age a long time ago...

http://datsun1200.com/modules/myalbum/photos/10945.jpg
http://datsun1200.com/modules/myalbum/photos/10947.jpg

don't know it the flange pattern are the same for the 20v....

Re: 4age 20v turbo intake plenum...
 

WTF!! Why is the brake booster/master cylinder mounted on the shock tower? :S That's the thing, if you make it into one solid piece then you can't bolt it back on cause the bolt used to attach it back on are found on the inside of it.

Yeah club4ag lost alot of it's stuff when they made the new forum. They lost my how to make your own panhard and 4link stickied thread. :'( My first sticky post I've ever gotten.

I'd say just if your not gonna be taking it off just jbweld it shut. Pull out the rubber gasket between the plenum halfs and lay down a nice section of JB all around it and then bolt it back together or just bolt it back together and then just lay a nice bead all the way around but then the only way your getting it off is to cut the plenum in half. Personally I'd just use it the way it is and lay a nice bead of silicone all the way around and bolt it back together and start boosting.

Re: 4age 20v turbo intake plenum...
 

yip, it's a remote booster, for car's that don't have enough space behind the Brake master..... It's wireless too... :y

Re: 4age 20v turbo intake plenum...
 

Wireless brake booster....That just don't so right. :o :X

Re: 4age 20v turbo intake plenum...
 

i've got this for a 20v, but it'll cost yah ;D
Attachment 28258
Attachment 28259