has anyone install a zt2 on a 95 civic? I installed mine but I am not sure if its correct, can somene show me their install so I can be assured? thanks!

 

What aren't you sure of? Did you use an ECU pinout for your car and follow the wiring diagram that came with the Zeitronix?
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

 

the ecu pinout in my haynes manual seems incorrect, it gives a pin number, then a color of the the wire, and the color wire does not match the pin number, for example pin d14 is blank on my wirining

 

P28 ECU right?

Directly from the widebands manual and vafc install guide
Red=switched power=A25 ECM power
Green=RPM=A21 for obd1 P28 ECU
Black, brown,brown=ground=A26
Grey=TPS=D11
Blue=user input=D17 presure signal from ECU
Purple=narrow output=D14 (which is the narrow band input on the P28 ECU)

 

for some reason my ecu does not have a wire going into to d14, but I got that covered I hook it to the only all white wire going into the ecu.

 

My D14 is white too, y0!

 

wired mine like this

red zietronix and black zeitronix wires to a cig lighter plug for portability.

tps wire on zeitronix tapped to D11-TPS TPS Signal

d14, don't know where you're getting that. thats an o2 sensor wire, you could wire your zietronix o2 simulator signal wire to it, i just opted to leave it out.

rpm wire on zietronix to a21 ign control module.

 

I think my zeitronix is defective, my boy comming over today to try his in my car, the wiring I did is correct from all I've read and from what people told me, but I have no reading on the datalogger he has a gauge so we will check if its my computer settings or the unit. thanks.

 

when you started the program, did you go file, then new, also hit enter to start logging, and sometimes to get mine to kick in, i have to hit space (pause) a couple times.

 

I've had 2 defects. Its going back. Im gonna get a Innovate LM-1.