Engine Management eCtune , Crome , AFC , FMU , Zdyne , Hondata , EMS , TE , Uberdata Anything to control your fuel, spark needs!

which wires too cut for resistor box?

Old 03-19-2004, 07:02 PM
  #1  
1.0 BAR
Thread Starter
 
Join Date: Dec 2002
Posts: 289
Default which wires too cut for resistor box?

okay, I'm in the proccess of cutting the blk/yell wires from the junction connector, but there are 8 wires. and there all blk/yellow which 4 do i cut?the right side or left side(lookin from the front of engine bay) can anyone give some pics or show me which 4 blk/yell wires on that harness? thanks
Boost n Ls is offline  
Old 03-19-2004, 07:06 PM
  #2  
3.0 BAR
 
Join Date: Mar 2003
Posts: 21,494
Default Re:which wires too cut for resistor box?

Dr.Boost is offline  
Old 03-19-2004, 07:10 PM
  #3  
1.0 BAR
Thread Starter
 
Join Date: Dec 2002
Posts: 289
Default Re:which wires too cut for resistor box?

nice!!! thanks dr.boost that ---- helped out big time. Time to go cut and solder
Boost n Ls is offline  
Old 03-19-2004, 07:15 PM
  #4  
3.0 BAR
 
Join Date: Mar 2003
Posts: 21,494
Default Re:which wires too cut for resistor box?

Just a little warning/tip. Test the wires to make sure they are actually going to the injectors before you cut them. I have heard of some models being different, so it would be a good idea to check first(coninuity).
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
Dr.Boost is offline  
Old 03-19-2004, 09:44 PM
  #5  
1.0 BAR
 
Join Date: Feb 2004
Posts: 460
Default Re:which wires too cut for resistor box?

Ok this may seem like a stupid question but before I get flammed I read through the faqs. I couldn't seem to find out what kind of resistor box to get. Is there a certain one I need to pick up? Or just any resistor box? Take into consideration that wiring of a car is one thing I have problems with...
DraginX is offline  
Old 03-19-2004, 09:46 PM
  #6  
3.0 BAR
 
Join Date: Mar 2003
Posts: 21,494
Default Re:which wires too cut for resistor box?

Any one from a CRX will work fine. You can also use 10ohm 10 watt resistors inline with the injectors to avoid the entire resistor box situation. It's cheaper too.
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
Dr.Boost is offline  
Old 03-19-2004, 09:47 PM
  #7  
3.0 BAR
 
Join Date: Mar 2003
Posts: 5,285
Default Re:which wires too cut for resistor box?

A resistor box out of an OBD0 Integra or Civic will work perfectly.
tranceminister is offline  
Old 03-19-2004, 09:51 PM
  #8  
1.0 BAR
 
Join Date: Feb 2004
Posts: 460
Default Re:which wires too cut for resistor box?

Originally Posted by tranceminister
A resistor box out of an OBD0 Integra or Civic will work perfectly.
My car is a 94 so obd1, sorry should have stated that first. So do I still use the obdo teg or civic resistor box?
DraginX is offline  
Old 03-19-2004, 09:53 PM
  #9  
1.0 BAR
 
Join Date: Feb 2004
Posts: 460
Default Re:which wires too cut for resistor box?

Originally Posted by Dr.Boost
Any one from a CRX will work fine. You can also use 10ohm 10 watt resistors inline with the injectors to avoid the entire resistor box situation. It's cheaper too.
Thanks Doc, missed your post, I think that would be better for me. Can I get those at radio shack?
DraginX is offline  
Old 03-19-2004, 09:57 PM
  #10  
3.0 BAR
 
Join Date: Mar 2003
Posts: 21,494
Default Re:which wires too cut for resistor box?

Dr.Boost is offline  

Thread Tools
Search this Thread
Quick Reply: which wires too cut for resistor box?


Contact Us - Sitemap - Advertising - Cookie Policy - Privacy Statement - Terms of Service

© 2019 MH Sub I, LLC dba Internet Brands

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.