Re: wideband innovate sensor ?? how long it lasts
Originally Posted by Adam Hopkins
Turbo4life- When you calibrated did you pull it out of the exhaust and make sure it is getting fresh air.
Innovate has it in the owners manual for the LM-1 in their web site. www.innovatemotorsports.co They say the water vapor only affects the sensor if it is placed too low in the exhaust (like below 3 or 9 o-clock). It is a pdf somewhere. It is NOT a good idea to connect the LC-1 permanently to 12V and switch it on with a separate switch before the vehicle is started. Depending on the climate and the sensor position in the exhaust, condensation water can form in the exhaust pipes. This condensation water could then be blown by the exhaust stream against the hot sensor when the car is started. The resulting heat shock can permanently damage the sensor. 4.3 Calibration Schedule Normally aspirated daily driver: - Calibrate before installation of new sensor - Calibrate new sensor again after 3 month of use - Thereafter calibrate once a year or every 20,000 miles, whichever comes first Turbo car, daily driver (tuned rich): - Calibrate before installation of new sensor - Calibrate new sensor again after 3 month of use - Thereafter calibrate twice a year or every 10,000 miles, whichever comes first Race car - Calibrate before first installation of new sensor - Calibrate once per race weekend Dyno use - Calibrate a new sensor - Calibrate every 2-3 days, depending on usage
Originally Posted by Adam Hopkins
Turbo4life- When you calibrated did you pull it out of the exhaust and make sure it is getting fresh air?
|
Re: wideband innovate sensor ?? how long it lasts
Also driving around with the sensor off will ruin it in a matter of hours, ask me how I know :1
|
Re: wideband innovate sensor ?? how long it lasts
i have a sensor from my LC-1 that a friend fried by hooking it up backwards :1 if you can't find one at a decent price PM me.
|
Re: wideband innovate sensor ?? how long it lasts
ya i always pulled it out in fresh air i reset it completly by unplugging it and powring up the lc_1 then pluging it in and free air calibration outside of the car i just let it sit on the radiator support then turn it off and unplug it and scew it back in and then plug it in and then go from there.. and i was heating it before start up a couple of times maybe that has to do something with it taking a ----..
|
Re: wideband innovate sensor ?? how long it lasts
I don't know about the other widebands, but the zeitronix wideband have a sensor warmup period of 30 seconds, and the AEM has one of 10 seconds, they recomend using it before starting. they both uses the same sensor.
|
Re: wideband innovate sensor ?? how long it lasts
Dont heat up the sensor prior to starting...
Do place it 9 o' clock to 3 o' clock position in the exhaust 8-18 inches from the turbo... Constantly taking out and putting in the sensor will shorten the life of it...these sensors are sensitive to getting knocked around... Leaded gas will shorten the life of the sensor... Sensors are never covered under any sort of warranty :-\ |
Re: wideband innovate sensor ?? how long it lasts
YA.. IM GONNA TRY TO ------ RIG MY SENSOR TO WORK ILL ---- WITH IT SOME CARB CLEANER AND ---- ;D
|
Re: wideband innovate sensor ?? how long it lasts
Originally Posted by xenocron
Dont heat up the sensor prior to starting...
Do place it 9 o' clock to 3 o' clock position in the exhaust 8-18 inches from the turbo... Constantly taking out and putting in the sensor will shorten the life of it...these sensors are sensitive to getting knocked around... Leaded gas will shorten the life of the sensor... Sensors are never covered under any sort of warranty :-\ |
Re: wideband innovate sensor ?? how long it lasts
Originally Posted by rudebwoy
so it is best just to get in the car after its been sitting overnight and start it up right away?
|
Re: wideband innovate sensor ?? how long it lasts
I have mine installed at the end of the downpipe before the cat, at 12 o clock position. I also contsantly run water/methanol injection when I am in boost.
|
All times are GMT -5. The time now is 10:12 AM. |
© 2024 MH Sub I, LLC dba Internet Brands