wideband gauge cluster mod
 

I had the day off, so I decided to find a place to put my wideband display..
had plans of putting it behind the tach but I decided to not cut it up incase I ever wanted to put it back to a stock cluster..

I shift by ear, and setup a CEL shift light for high rpm shifts.. so no need for the stock tach >:D

http://c2.ac-images.myspacecdn.com/i...465f2b9a61.jpg

http://c4.ac-images.myspacecdn.com/i...34b799d053.jpg

Re: wideband gauge cluster mod
 

looks tits man. I ------ love it!! >:D

Why not get a digital tach from summit or something to mount right above the w/b. These are just a few suggestions for ya....

http://store.summitracing.com/egnsea...=KeywordSearch

http://store.summitracing.com/egnsea...=KeywordSearch

http://store.summitracing.com/egnsea...=KeywordSearch

Re: wideband gauge cluster mod
 

thats a realy clean install.

Re: wideband gauge cluster mod
 

this might work well too http://cgi.ebay.com/DIGITAL-RED-LED-PANEL-FREQUENCY-SPEED-METER-TACHOMETER_W0QQitemZ260312145283QQcmdZViewItemQQpt ZLH_DefaultDomain_0?hash=item260312145283&_trksid= p3286.c0.m14&_trkparms=66:2|65:15|39:1|240:1318

Re: wideband gauge cluster mod
 

+1

I might need to look in to doing that, beats teh hell out of setting it in the ash tray

Re: wideband gauge cluster mod
 

another pic, showing a little more detail after it was done.. it's all hooked up now, i'll get a night time pic in the car later
Attachment 13137

Re: wideband gauge cluster mod
 

looks ------ tits

ive done that once with a integra cluster...

i did a 3.5 lcd screen though

Re: wideband gauge cluster mod
 

thanks guys.. yeah i'm happy with it.

thinking about doing a little write up on it once I get the controller mounted in my glove box

Re: wideband gauge cluster mod
 

is that JAW?

Re: wideband gauge cluster mod
 

its bootyful >:D

The tach is only a suggestion, u did say u shift by ear..... and have the CEL shiftlight....so u should be fine....

Re: wideband gauge cluster mod
 

yupp
thanks ;D
yeah I have room to fit a smaller tach above the wb02 display.. I think I could chop the stock tach up and fit the display in the same spot,.. maybe if and when I find a spare cluster

Re: wideband gauge cluster mod
 

how did you atach it?? use hot glue???

Re: wideband gauge cluster mod
 

the holes are cut so the display slides in very snug.. and the back of the cluster pushes against it too.. it doesn't even budge once the back of the cluster is on

also I plan on getting a dark piece of tint to put over the display so it hides the unused portion of the display during daylight

Re: wideband gauge cluster mod
 

http://cgi.ebay.com/ebaymotors/Tail-...4014QQtcZphoto here is some nice vinyl ---- that sticks very well and i think would work great for you