where are the ecu fuses or fuses that will keep the ecu from turning on?
 

I dont think my ecu ive put in the car are working because i'm missing or blow an ecu fuse. I checked the one in the engine bay. Is there one under the dash? The ecu works fine in my del sol.

When I turn on the car, it cranks, but i dont get any fuel. I dont get an CEL even when i jump the service connector. It seems to me that my ECU is not getting power, but I'm open to other ideas.

The car is a 97 teg

Thanks,
Nick

Re: where are the ecu fuses or fuses that will keep the ecu from turning on?
 

yea drivers side kick panel, i dont know if its going to be the same as my buddies 95 gsr, but the hazard fuse resets the ecu so im going to as you this

do your hazard lights work? O0

Re: where are the ecu fuses or fuses that will keep the ecu from turning on?
 

I know on most cars it is in the fuse box right by the battery. I am prerry sure it says ECU on it.

Re: where are the ecu fuses or fuses that will keep the ecu from turning on?
 

yea uhh he said he checked the one in the engine compartment lol ::)

Re: where are the ecu fuses or fuses that will keep the ecu from turning on?
 

yup they work

Re: where are the ecu fuses or fuses that will keep the ecu from turning on?
 

hmmmm, any blow fuses at the kick panel? try a volt meter at the ecu? dissconnect the battery and check for resistance (ohms) you might have a short to ground on some important wire ect ect no resistance (dead short)= o ohms

Re: where are the ecu fuses or fuses that will keep the ecu from turning on?
 

i would check the one in the car. is there a different fuse under the hood for the ecu becuase the hazard doesn't stop it from starting or driving it is like the memory wire for the ecu

Re: where are the ecu fuses or fuses that will keep the ecu from turning on?
 

yea thats what im saying yo O0

Re: where are the ecu fuses or fuses that will keep the ecu from turning on?
 

very far back right side fuse in the engine compartment fuse box.

Re: where are the ecu fuses or fuses that will keep the ecu from turning on?
 

Is the thermostat ground bolted down?