HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Engine Management (https://www.homemadeturbo.com/engine-management-10/)
-   -   what chip or mod i need?.......HELP!! (https://www.homemadeturbo.com/engine-management-10/what-chip-mod-i-need-help-72523/)

geR 01-13-2007 04:40 AM

what chip or mod i need?.......HELP!!
 
i have a 05 civic (d17a1) and in the next weekend i will install the turbo kit using a FMU, but i read that my car doesnt work with the FMU because,the engine doesnt have a return line something like that ???....wich chip i can use or what i can do to have my engine management......and what happend if i install the turbo with out the engine management? :l

i will run @ 6psi... ;D

hany 01-13-2007 05:59 AM

Re: what chip or mod i need?.......HELP!!
 
dont say it again plz ( run withot fuel managment )
and if you need to know what will happn. read this (G2IC)

Because we are adding air to the air side of the air fuel ratio with the turbo we must also add a proportional amount of fuel. If there is not enough fuel to compliment the extra air being forced into the cylinders a lean condition will be created which will cause detonation. Detonation is the enemy on a turbocharged car. Detonation is an uncontrolled, very forceful, explosion in the cylinder that can be audible as knocking. If you want to know what detonation sounds like, take a couple of small ball bearings and put them in an empty aluminum soda can. Now shake the can vigorously and remember that sound. If you should ever hear that sound while driving your car you should avoid the condition (usually WOT, wide open throttle) that creates the sound until you can ascertain its cause. Also be aware that a lean condition makes more heat. This can burn pistons, piston rings, valves, and destroy spark plugs. The funny thing is that, generally speaking, leaner fuel mixtures create more power. So we know what can happen if there is a lean condition, what happens if we have a rich mixture (more fuel than than needed). Rich mixtures sap power, foul spark plugs and oxygen sensors, and use more gas than need be. A rich mixture also runs a lot cooler. Of course, nobody has ever blown up a piston by running rich. So as you can see there is a trade off between running lean mixtures and getting maximum horsepower at the risk of doing damage to engine internals, and running rich and losing some horsepower but gaining quite a bit of reliability and safety. The key to all of this is fuel and engine management and tuning.


so you have to use any fuel managment . unless that

if you think ---- is funny ---- your self and save your money

Chris Harris 01-13-2007 09:47 AM

Re: what chip or mod i need?.......HELP!!
 

Originally Posted by hany
if you think ---- is funny ---- your self and save your money

WTF??? :D

Look into Emanage...

I have no idea on these new cars though...they are too shiny for me.

hany 01-13-2007 03:55 PM

Re: what chip or mod i need?.......HELP!!
 
i think safc2 will work with you

geR 01-13-2007 09:20 PM

Re: what chip or mod i need?.......HELP!!
 
yeah, im gonna install the SAFC to tune my car...but i have another question ???....the dsm injectors will fit in my car? :S....or what injectors i need?...THANK YOU :y


All times are GMT -5. The time now is 10:06 PM.


© 2024 MH Sub I, LLC dba Internet Brands