HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Engine Management (https://www.homemadeturbo.com/engine-management-10/)
-   -   VW HM turbo setup (https://www.homemadeturbo.com/engine-management-10/vw-hm-turbo-setup-38832/)

spoon fed 05-02-2005 04:23 PM

VW HM turbo setup
 
doing a hm setup with a shelby turbo on a 96 VW golf 8V
what would be the easiest thing for fuel mangement? would an FMU suffice??

sohc_mshue 05-02-2005 04:54 PM

Re: VW HM turbo setup
 
FMU's suck. I think that some vw guys use megasquirt. You may want to look into that.

turbohf 05-03-2005 03:17 AM

Re: VW HM turbo setup
 
i vote for an extra injector controler... SDS EIC or setting up a Megasquirt as a EIC...

spoon fed 05-03-2005 10:48 AM

Re: VW HM turbo setup
 
this is a VERY lowbudget setup....he doesn't wanna spend the money on megasquirt....
so what the next best thing, explain well cause i'm dumb 8)

jung4g 05-03-2005 11:50 AM

Re: VW HM turbo setup
 
you can just get the turbo chip from TTtuning. But you may have issues with a high MAF signal due to boost. The FMU won't work because the car will still be ready the high airflow and getting f'ed up, there is no way to block the MAF from seeing boost (like the missing link would in a honda). Just get the chip. or even better -switch to Honda

spoon fed 05-03-2005 08:28 PM

Re: VW HM turbo setup
 
there is no MAF
i have a honda, its my buddy's setup ;)

turbohf 05-03-2005 10:46 PM

Re: VW HM turbo setup
 

Originally Posted by spoon fed
this is a VERY lowbudget setup....he doesn't wanna spend the money on megasquirt....
so what the next best thing, explain well cause i'm dumb 8)

sell the car and buy something that is fast (make payments on EVO)...


Originally Posted by spoon fed
there is no MAF
i have a honda, its my buddy's setup ;)

a 96 VW will have a MAF/MASS...

shmaptoe 05-08-2005 11:20 PM

Re: VW HM turbo setup
 
eip stage 2 turbo chip- it ran my friends car fine before he went haltech.

i see a lot of vw guys run fmu's...my friend is running a cartech rising rate fmu on an aba-T with g60 injectors. everything else is stock. his a/f is 11.8-12 on 10 psi. plus vw makes its motors out of solid steel or some ----, cause i rarely see one break under mild boost( their trannys are a different story...)

turbohf 05-09-2005 01:38 AM

Re: VW HM turbo setup
 

Originally Posted by shmaptoe
eip stage 2 turbo chip- it ran my friends car fine before he went haltech.

i see a lot of vw guys run fmu's...my friend is running a cartech rising rate fmu on an aba-T with g60 injectors. everything else is stock. his a/f is 11.8-12 on 10 psi. plus vw makes its motors out of solid steel or some ----, cause i rarely see one break under mild boost( their trannys are a different story...)

my ABA looks like cast iron....but hey i could be wrong ::)

Racintweek 05-09-2005 07:38 AM

Re: VW HM turbo setup
 
OBD1 aba's have forged goodies inside,




All times are GMT -5. The time now is 10:07 PM.


© 2024 MH Sub I, LLC dba Internet Brands