Originally Posted by TurboEF9

Where did this rumor start that TurboEDIT doesn't support PR3/PW0? PR3/PW0 don't have boost code. They're bastard ECUs.. but whatever support is out there, as far as I know, TurboEDIT supports it.

Originally Posted by projekteg

not if you're car came equipped with vtec. you'll always have wiring if the car isn't equipped with vtec obviously, even if it's just from the solenoid to the shock tower, it's never plug and play unless the car came equipped with vtec.

no, as of right now, nitrous script doesn't have seperate maps, it's still being tested, but it does have the ability to send power to a solenoid via one wire, just cut and paste vtec maps after the desired rpm which you set it to engage if that's what you want to do, but i still don't see why you would want to use this as an option, if you convert the ecu to a p28, you can run uberdata, crome, hondata and/or any other rom editor with vtec support, instead of being limited to one program. the main reason this was a huge development for obd0 is more or less the lack/non existence or obd0 vtec usdm ecu's, and the fact that even the jdm vtec ecu's are have totally different code than what the 'chippable' usdm ecu's have and therfore pretty much require support from a different program other than turbo edit.

Originally Posted by Random Hero

and if your car came wired with vtec (after93) you would already HAVE a p28 :-) so there again no reason to do what i'm asking, its simple coding, and i'm wondering if it can be done easlily and i'm asking if someone will do it :-)

Originally Posted by projekteg

omg, i was always led to believe they couldn't be edited :P

Originally Posted by projekteg

really? i have a 00 si that came wired with vtec and it didn't come with a p28 ???