HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Engine Management (https://www.homemadeturbo.com/engine-management-10/)
-   -   VAFC Install Instructions - Definitive Guide (mostly) (https://www.homemadeturbo.com/engine-management-10/vafc-install-instructions-definitive-guide-mostly-43474/)

2redstars 10-18-2005 03:20 PM

Re: FREE Chip Kit for VAFC Install Instructions - Definitive Guide
 
heres the write up i did-
http://www.d-series.org/forums/showthread.php?t=2691

Slo_crx1 10-18-2005 07:48 PM

Re: FREE Chip Kit for VAFC Install Instructions - Definitive Guide
 
That's all well and good, but it's still just install instructions. Unless you're a complete idiot, figuring out how to install it is the easy part. How about in the Etc. mode...under display scale...the bottom on is Cr: +-3%...and you can change it from 3 up to 30% i believe. What exactly does this feature do? obviously it's some type of correction, but for what? Or what about in the settings mode with the TH-Point? I understand what the wide throttle setting is for, but what about the narrow throttle? What is typicly the best setting for that as well? I've figured out most of the rest, but these 2 puzzle me the most. :S

solfly 11-17-2005 08:14 PM

Re: FREE Chip Kit for VAFC Install Instructions - Definitive Guide
 
http://www.xspeed.com.au/manuals.php

is that any good?

Cray91 12-31-2005 09:27 AM

Re: FREE Chip Kit for VAFC Install Instructions - Definitive Guide
 

Originally Posted by chiman72
Trust me I had to search like crazy for that. Time well spent

I think there is a link to that on turboD16.com

I have read it b4, and I have never used the hack or been interested in it. So if I have seen it by accident, it couldn't have been that hard.


MAJORAHOLE 02-21-2006 12:14 PM

Re: FREE Chip Kit for VAFC Install Instructions - Definitive Guide
 

Originally Posted by slo_crx1
That's all well and good, but it's still just install instructions. Unless you're a complete idiot, figuring out how to install it is the easy part. How about in the Etc. mode...under display scale...the bottom on is Cr: +-3%...and you can change it from 3 up to 30% i believe. What exactly does this feature do? obviously it's some type of correction, but for what? Or what about in the settings mode with the TH-Point? I understand what the wide throttle setting is for, but what about the narrow throttle? What is typicly the best setting for that as well? I've figured out most of the rest, but these 2 puzzle me the most. :S

the correction is for fuel, if you have your vtec kick in before stock. throttle point i'm not exactly sure, it has to do with the % of throttle to fuel change ratio.

ososlohatch 02-01-2007 02:06 PM

Re: VAFC Install Instructions - Definitive Guide (mostly)
 
low throttle to high throttle crossover

Slo_crx1 02-01-2007 07:29 PM

Re: FREE Chip Kit for VAFC Install Instructions - Definitive Guide
 

Originally Posted by MAJORAHOLE
the correction is for fuel, if you have your vtec kick in before stock. throttle point i'm not exactly sure, it has to do with the % of throttle to fuel change ratio.

Lol...you guys are a bit late on that one :P I did finally get them figured out, and how the percentages change with the settings vs. throttle crossover point. None the less, I've moved on to ecu tuning, so the afc pretty much sits as a $400 gauge :-X

ososlohatch 02-02-2007 10:05 AM

Re: FREE Chip Kit for VAFC Install Instructions - Definitive Guide
 

Originally Posted by slo_crx1
Lol...you guys are a bit late on that one :P I did finally get them figured out, and how the percentages change with the settings vs. throttle crossover point. None the less, I've moved on to ecu tuning, so the afc pretty much sits as a $400 gauge :-X

400 wow you got raped i get vafcII for 210 shipped to my door

Slo_crx1 02-02-2007 09:46 PM

Re: FREE Chip Kit for VAFC Install Instructions - Definitive Guide
 

Originally Posted by ososlohatch
400 wow you got raped i get vafcII for 210 shipped to my door

Yeah, pretty much. I bought it when they first came out with the version II, and ordered it through one of the local shops. My ass still hurts thinking about it. :-X


All times are GMT -5. The time now is 08:56 PM.


© 2024 MH Sub I, LLC dba Internet Brands