VAFC Earthing.
#3
Re:VAFC Earthing.
PLEASE tell me you didn't do that...
...you need to A) *ground* the wires in the correct order, and B) they are in-line to the ECU, not grounded to the chassis.
I would put them at least an inch to an inch and a half apart, brown closer than black.
[me=TurboEF9]sighs. [/me]
...you need to A) *ground* the wires in the correct order, and B) they are in-line to the ECU, not grounded to the chassis.
I would put them at least an inch to an inch and a half apart, brown closer than black.
[me=TurboEF9]sighs. [/me]
#4
Re:VAFC Earthing.
Originally Posted by -SphiNx-
It says in the manual to earth the brown wire closer to the ecu than the black..
But can i earth the wires just onto a bolt, or onto different bolts in the cabin?
Thanks
But can i earth the wires just onto a bolt, or onto different bolts in the cabin?
Thanks
#5
Re:VAFC Earthing.
As i said, its all sorted .. Just that the freakin' guy that i got it off tried to extent the wires, but joined the correct colour wires to different colours.. I initially hooked it up as per manual but the engine ran like ----, so i cut back the shrink wrap stuff and checked it out.. Its all working now. The earth wire was green after he extended it
Thread
Thread Starter
Forum
Replies
Last Post
Slo_crx1
Engine Management
4
10-20-2005 04:40 PM