HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Engine Management (https://www.homemadeturbo.com/engine-management-10/)
-   -   Using tuning software with different-than-Honda-sensor voltage outputs? (https://www.homemadeturbo.com/engine-management-10/using-tuning-software-different-than-honda-sensor-voltage-outputs-73445/)

NethercuttML2 01-31-2007 08:29 PM

Using tuning software with different-than-Honda-sensor voltage outputs?
 
Quick question for any software gurus out there:

Are any platforms able to handle voltages other than what the Honda sensors put out? I've heard that Crome PRO can use different TPS voltages, but what about the others?

For what it's worth, let's figure out how to hack a Honda ECU into my Kia harness to manage the motor!!

Inquisition 01-31-2007 08:42 PM

Re: Using tuning software with different-than-Honda-sensor voltage outputs?
 
It would be easier to raid your local junkyard and just use honda sensors.

NethercuttML2 01-31-2007 09:22 PM

Re: Using tuning software with different-than-Honda-sensor voltage outputs?
 

Originally Posted by Inquisition
It would be easier to raid your local junkyard and just use honda sensors.

Or maybe I could sleep with the Kia ECU under my pillow in hopes that it will be EEPROM in the morning instead of flash?

On a serious note, what are the chances that any of the sensors will bolt in?

Chris Harris 01-31-2007 09:46 PM

Re: Using tuning software with different-than-Honda-sensor voltage outputs?
 
The hardest part will be fitting the distributor to your motor...figure that out 1st.

NethercuttML2 02-01-2007 01:26 AM

Re: Using tuning software with different-than-Honda-sensor voltage outputs?
 

Originally Posted by xenocron
The hardest part will be fitting the distributor to your motor...figure that out 1st.

I'm not a Honda guy, so I dunno. Are all ECU's that are able to be chipped only for motors with distributors? There's not a single chipped ECU on a DIS Honda? ???

Unless of course all Hondas have distributors? Seriously, I dunno?

Chris Harris 02-02-2007 10:13 PM

Re: Using tuning software with different-than-Honda-sensor voltage outputs?
 

Originally Posted by NethercuttML2
I'm not a Honda guy, so I dunno. Are all ECU's that are able to be chipped only for motors with distributors? There's not a single chipped ECU on a DIS Honda? ???

Unless of course all Hondas have distributors? Seriously, I dunno?

You have to match the ECU to the distributor with Hondas...you can't lets say, put a Honda ECU in a Toyota and use the stock Toyota distributor...

HMTdmc 02-04-2007 11:46 PM

Re: Using tuning software with different-than-Honda-sensor voltage outputs?
 
for all the trouble it would be to use a honda ecu you may as well use mega squirt.

Scott-EP 02-05-2007 09:46 PM

Re: Using tuning software with different-than-Honda-sensor voltage outputs?
 

Originally Posted by Dmc1
for all the trouble it would be to use a honda ecu you may as well use mega squirt.

+1, but i have thought about doing the same thing. i still might one day just for the fun of it

Tom-Guy 02-06-2007 01:57 AM

Re: Using tuning software with different-than-Honda-sensor voltage outputs?
 

Originally Posted by xenocron
You have to match the ECU to the distributor with Hondas...you can lets say, put a Honda ECU in a Toyota and use the stock Toyota distributor...

The ST165/WRC ST205 All-Trac hybrid I looked at only had CKP and CYP, no clue if they are in Honduh-correct alignment, no TDC sensor. Are there any you know of with TDC?

Chris Harris 02-06-2007 08:39 AM

Re: Using tuning software with different-than-Honda-sensor voltage outputs?
 
Typing owns me...that CAN, should have been a CAN'T


All times are GMT -5. The time now is 04:50 PM.


© 2024 MH Sub I, LLC dba Internet Brands