Re: using a pretuned map !!
 

survey says...

X X X

only use someone elses tuned map as your basemap...don't assume it's good. csaddict has almost the same setup as i do and i sent him my perfectly tuned afr 13-12 through the map and it was way rich on his car. the tune should be tuned specifically to your car and environment. you're already saving on running a diy engine management solution, but you'll still have to give up a little $$ to tune it.

Re: using a pretuned map !!
 

here's a better question....why are people using DIY management IF THEY DONT WANY TO DO IT THIER SELF

Re: using a pretuned map !!
 

Yeah I wonder that too sometimes...but its obviously the price factor.

Re: using a pretuned map !!
 

i say let them be lazy and then see what the price factor is >:D

Re: using a pretuned map !!
 

i have a p28 ecu on a d16z6. running a t25 turbo. i want to run 10-11 psi stock block. i am gonna have the ecu set up for uberdata and would like to try it yself. i need it done asap really. a friend and i are going to attend a tuning glass in june but i want to learn what i can now. the class is $1000!!! a piece not including room and board and gas to get there. but i need a basmap if anyone has one. just a bin i can use to get started.


255 fuel pump
t25
hf mani
450 injectors
fmic
d16z6

also was wondering if i should install my head studs and use the cometic head gasket to run 9:1 compression ratio?
i als o have a wideband available and my friend has all software. we are both new at this and dont have any basemaps