Uber--->crome?
3.0 BAR
Joined: Jul 2003
Posts: 6,447
Re: Uber--->crome?
Walter I have everything you need to do self tuning...when you pick up the ECU you should pick up anything else you need at the same time (because of shipping).
A BASIC, DIY setup for tuning your own ECU would consist of:
- Chipped ECU
- Datalogging cable (serial or USB connection type)
- Chip Burner and Chips
- A Wideband
You can use CROME FREE, and then datalog pretty effectively with FreeLog (find at PGMFI.ORG) to get the hang of tuning. But Crome Pro is worth the $149...
A BASIC, DIY setup for tuning your own ECU would consist of:
- Chipped ECU
- Datalogging cable (serial or USB connection type)
- Chip Burner and Chips
- A Wideband
You can use CROME FREE, and then datalog pretty effectively with FreeLog (find at PGMFI.ORG) to get the hang of tuning. But Crome Pro is worth the $149...
Originally Posted by Walter
ok , i'll try read it.. my english is low..
where can i to get ROM burner?
i have to take off the chip
.
the ecus by xecronon have connector USB? or how have i to connect the ecu to laptop?.
thank you.
where can i to get ROM burner?
i have to take off the chip
.the ecus by xecronon have connector USB? or how have i to connect the ecu to laptop?.
thank you.
0.5 BAR
Joined: Apr 2004
Posts: 144
Re: Uber--->crome?
Originally Posted by 95RedEX
A chipped ecu is a chipped ECU. I'm trying to switch to Crome and the only difference is cutting J12 on the ECU to datalog. I might've had to tweak my datalogging cable as well, but the actual chipping and burning is the same.
1.5 BAR
Joined: Aug 2004
Posts: 948
Re: Uber--->crome?
Originally Posted by hamburgler
since when do you need to cut that j12 jumper to data log? using free log, you shouldnt have to
https://www.homemadeturbo.com/forum/...?topic=60555.0
3.0 BAR
Joined: Apr 2006
Posts: 2,057
Re: Uber--->crome?
Originally Posted by xenocron
Walter I have everything you need to do self tuning...when you pick up the ECU you should pick up anything else you need at the same time (because of shipping).
A BASIC, DIY setup for tuning your own ECU would consist of:
- Chipped ECU
- Datalogging cable (serial or USB connection type)
- Chip Burner and Chips
- A Wideband
You can use CROME FREE, and then datalog pretty effectively with FreeLog (find at PGMFI.ORG) to get the hang of tuning. But Crome Pro is worth the $149...
A BASIC, DIY setup for tuning your own ECU would consist of:
- Chipped ECU
- Datalogging cable (serial or USB connection type)
- Chip Burner and Chips
- A Wideband
You can use CROME FREE, and then datalog pretty effectively with FreeLog (find at PGMFI.ORG) to get the hang of tuning. But Crome Pro is worth the $149...
)i hope that the dataloggind isnt very hard..
3.0 BAR
Joined: Jul 2003
Posts: 6,447
Re: Uber--->crome?
There are varying datalogging protocols to use yes...but if you want to use the code that enables the fastest (full duplex) you need to cut J12. I think you can use other protocols in Freelog sure...and they minght work without cutting J12 (aka, what Uberdata uses).
Originally Posted by hamburgler
since when do you need to cut that j12 jumper to data log? using free log, you shouldnt have to
)
Thread
Thread Starter
Forum
Replies
Last Post
