Re:turboedit
 

You mean having rich parents with loose pockets doesn't make you a pioneer? ???

I've been going about this all wrong. :-[
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

Re:turboedit
 

Yes...the PS9 is an auto ECU. For some reason I thought you were talking PR4.

PS9 is chipped just like the standard OBD0 ECUs

Re:turboedit
 

Read up some more !!...
If you did your research you would know that if you have a vtec engine to better go OBD1 and use Uberdata.
Turboedit is better suited for OBD0 non vtec

Re:turboedit
 

for the price of upgrading to obd1 and using uberdata i could probalby find a zdyne unit :(

soo its possibe to use the ps9 ecu with a pm6 bin, i wish i could find somebody who is currently using it, so i can learn from them.

Re:turboedit
 

It doesnt cost $900 to convert up to Obd1.

By the time you sell off your OBD0 stuff and get OBD1 stuff...the only thing you really have to pay for is the conversion harness (~$75)

Re:turboedit
 

you can find zdynes for about 500 ish and it almost cost that much to convert to obd1 with the distributor, harness, injectors and ecu

Re:turboedit
 

I picked up a dizzy for $50
P28 ECU for $90
OBD1 connectors for $10, OBD0 connectors for free and made myself a harness


Thats $150

Sell your ECU ($40-50) Sell your dizzy ($50) and then either spend $75 on a conversion harness or make your own for dirt cheap.

Comes no where close to $500...but go ZDYNE for all I care

Re:turboedit
 

can i get the obd1 connectors from you? (do you have extra)
what obd1 dizzys can i use ? (b16a, b18c) are those my only 2 options, i might just look into that.

Re:turboedit
 

nah i dont have any...i recommend a junk yard or the classifieds here

if you have to go buy a convo harness (not a terrible idea really since they are fully tested and functional), i would say go with Blown90Hatch on Honda-Tech. He has a good reputation and makes a few different custom configurations based on your setup.

There are some cheaper solutions out there that will work as well...i just have seen that he has pretty good customer service and satisfied customers.

if you have a b16 then yes you will need the gsr or SI distributor...might be a touch more expensive than my LS distro

Re:turboedit
 

well if i could sell my zdyne 1 wire, and stock distro i might have enough for a p28 and obd1 distro, then i just need to come up with conversion harness, injectors, there is a shop that can probably tune the uberdata for me!