HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Engine Management (https://www.homemadeturbo.com/engine-management-10/)
-   -   tune for nitrous? (https://www.homemadeturbo.com/engine-management-10/tune-nitrous-33734/)

B16Drag 01-23-2005 10:11 AM

Re:tune for nitrous?
 
do 75 shot with the bottle warmer... it will give you a nice kick

fsufan814 01-23-2005 12:39 PM

Re:tune for nitrous?
 

Originally Posted by B16Drag
do 75 shot with the bottle warmer... it will give you a nice kick

::)

Cray91 01-25-2005 05:33 AM

Re:tune for nitrous?
 

Originally Posted by weirRacing
i had a 50 shot wet setup on my d, then my b. i didn't do anything about the tuning other than retard the timing a bit as mentioned above. i ended up having to replace my clutch pretty quick. i have a complete custom kit including bottle warmer, purge kit, bottle guage.... i'd love to sell it but no one seems to want it. it includes all the wiring, relays, all you have to do is hook it up! everything is labelled and still connected together so putting it in would be a snap. maybe i should advertise it again.

This is the wrong site to try to sell nitrous to. I might be able to get my buddy to put his impala on the bottle, that would be fun. Just not in winter.

RacenSi04 01-25-2005 11:36 AM

Re:tune for nitrous?
 
if you have some extra money, a safc2 or vafc2 wouldnt hurt eather, pump more fuel when nitrous kicks in, msd ignition helps too

Guy-Fast 01-28-2005 02:19 AM

Re:tune for nitrous?
 

Originally Posted by RacenSi04
if you have some extra money, a safc2 or vafc2 wouldnt hurt eather, pump more fuel when nitrous kicks in, msd ignition helps too

waste of money. Fuel is added via jets all you need is a big pump to feed the fuel system. Try again ::)

Reddy 01-28-2005 06:02 AM

Re:tune for nitrous?
 
I got a pretty badass nitrous setup, its a NX direct port, NOS purge, and 2 bottles. For management I had a crane cam ignition with an ignition retard hooked up to the solenoids so the timing would only be retarted under the spray.

http://www.draglab.com/hmt/Whitey/TT...kit/NXkit1.jpg


http://www.draglab.com/hmt/Whitey/TT...kit/NXkit2.jpg

dean 01-28-2005 06:39 AM

Re:tune for nitrous?
 
nice kit man looks cool as foooooooooock
was it hard to set up

Reddy 01-28-2005 07:01 AM

Re:tune for nitrous?
 

Originally Posted by SHINGARA
nice kit man looks cool as foooooooooock
was it hard to set up



Actually not really. The majority of car ---- is usually a headache but that kit was fun to do if you have the right tools. I just bought a tight radius bender from NOS and a 37 degree flare tool and it went smoothly. I guess the hardest part was I wanted to keep them all equal length and just trying to get it to snake around the throttle cable.

93turbo16 01-28-2005 02:34 PM

Re:tune for nitrous?
 
That is a really nice setup. The best thing to do nitrous would be getting a dual table kinda thing so when nitrous comes in you can run off a different map. I think AEM has it and I believe Megasquirt does as well. I am not too in depth with nitrous, I just know my brother had a 100 shot on his ser, just went with colder plugs, pulled timing and had an adjustable FPR. And it was good to go. Ran 8.1 in the 1/8th on slicks.

Reddy 01-28-2005 05:45 PM

Re:tune for nitrous?
 
The thing about nitrous is that you don't need a crazy complicated fuel map for nitrous cause the wet systems usually take care of the fuel. So its really just the timing that needs tuning.


All times are GMT -5. The time now is 03:14 PM.


© 2024 MH Sub I, LLC dba Internet Brands