Engine Management eCtune , Crome , AFC , FMU , Zdyne , Hondata , EMS , TE , Uberdata Anything to control your fuel, spark needs!

timing belt broke.... now problems :(

Thread Tools
 
Search this Thread
 
Old 06-28-2007, 10:19 PM
  #1  
0.0 BAR
Thread Starter
 
gravator's Avatar
 
Join Date: Aug 2005
Posts: 19
Default timing belt broke.... now problems :(

hey guys my timing belt broke on my crx with a mini-me setup. z6 block with a y8 head. So anyways i changed the timing belt and it starts just fine and stays idle really good. Just if i try to gas it acts like its going to die. but now if im moving and try to gas it it seems to work fine. I am guessing it has something to do with air/fuel problems?? any suggestions??
gravator is offline  
Old 06-28-2007, 10:26 PM
  #2  
0.0 BAR
 
Oscar's Avatar
 
Join Date: Jun 2005
Location: WA
Posts: 0
Default Re: timing belt broke.... now problems :(

Is your cam timing correct?
Oscar is offline  
Old 06-29-2007, 09:01 AM
  #3  
0.0 BAR
Thread Starter
 
gravator's Avatar
 
Join Date: Aug 2005
Posts: 19
Default Re: timing belt broke.... now problems :(

yeah... lined it up like three different times with the specs. It doesnt backfire when driving or anything either. Its just when its at idle that if i try to step on gas it acts like its going to die.
gravator is offline  
Old 07-02-2007, 02:08 PM
  #4  
0.0 BAR
Thread Starter
 
gravator's Avatar
 
Join Date: Aug 2005
Posts: 19
Default Re: timing belt broke.... now problems :(

If the timing was off it would be all the time with the dying right?? I check the timing last night to make sure it is tdc and it was...... now if im in third and try to step on the gas to hard then it also acts like it is going to die. But if i creep into it then its ok.... Any suggestions pleaSE! I just broke the timing belt and i get a hand full... Put yet again it is hesitant sometimes when i step on the gas.... I dont have a adjustable cam gear just the stock y8 head cam. I have a z6 block as well FYI. Please help.

Thanks
gravator is offline  
Old 07-02-2007, 09:02 PM
  #5  
3.0 BAR
 
ifly87's Avatar
 
Join Date: Dec 2005
Posts: 2,081
Default Re: timing belt broke.... now problems :(

try a compression test if you'd like, but I'm guessing the timing is still off maybe even a tooth. triple check it, take it off completely and follow a manual's instuctions to the T.
ifly87 is offline  
Old 07-02-2007, 09:26 PM
  #6  
3.0 BAR
 
turboDA6's Avatar
 
Join Date: Jul 2004
Posts: 3,207
Default Re: timing belt broke.... now problems :(

is it possible that you bent some valves when the timing belt broke?
turboDA6 is offline  
Old 07-02-2007, 10:44 PM
  #7  
3.0 BAR
 
ifly87's Avatar
 
Join Date: Dec 2005
Posts: 2,081
Default Re: timing belt broke.... now problems :(

Yes, but you would probably hear some noise, and you would def. know if you did a compression or leakdown test.
ifly87 is offline  
Old 07-03-2007, 12:50 AM
  #8  
0.0 BAR
 
Oscar's Avatar
 
Join Date: Jun 2005
Location: WA
Posts: 0
Default Re: timing belt broke.... now problems :(

Originally Posted by ifly87
Yes, but you would probably hear some noise
No you wouldn't.

Maybe the first time, but it would all happen so fast you really wouldn't hear it unless you were paying attention.
Oscar is offline  
Old 07-03-2007, 01:40 PM
  #9  
0.0 BAR
Thread Starter
 
gravator's Avatar
 
Join Date: Aug 2005
Posts: 19
Default Re: timing belt broke.... now problems :(

I will check on the compression test and get back with you guys... I appreciate all the help... Thanks
gravator is offline  
Old 07-04-2007, 01:32 AM
  #10  
1.0 BAR
 
brettsb16a2's Avatar
 
Join Date: Feb 2007
Location: Floresville Tx
Posts: 236
Default Re: timing belt broke.... now problems :(

Just from experience i have done timing belts on honda sohc engines and the book way doesnt always get it right. One tooth will throw it off alot. Just for grins check the distributor cap and rotor, ya never know!!
brettsb16a2 is offline  


Quick Reply: timing belt broke.... now problems :(



All times are GMT -5. The time now is 06:01 PM.