I bought these from some guy who said that they were 45o cc injectors that came off of his eclipse gsx. but i can't seem to find a similar pic of these online. what do ya'll think?
http://i27.tinypic.com/bzsw0.jpg
http://i26.tinypic.com/344qkvt.jpg
http://i29.tinypic.com/2a5x5hw.jpg

 

they may be 450's, but there is no markings. they are NOT from a dsm.

 

truth

 

it's a delpli fuel injector. aka toyota.

 

i have been trying to find these online and i came accross this

http://cgi.ebay.com/ebaymotors/AFI-F...spagenameZWD1V

and also this is etched on every injector.

http://i25.tinypic.com/14ah34y.jpg

 

delphi injector all look the same. best way to do it is, add gas, pressurize to 42psi, spray it on a tripped open injector for one minute into a 1000ml container. that's your injector size.

 

did i get screwed over? should i sell these? i wanted some dsm 450 injectors for a d16z6 turbo build im doing. since i read those were easy to install.

 

you can flowcheck them yourself doing what i said. either that or HOPE you can find a model # or something to go off of. or pay to get them flowbenched.

 

on the top of the injectors there are two sets of numbers 9141 then there is 17104988. i lloked the last number up and found this. its the 8th one down.

http://www.caspeed.com/multec-injectors.html

 

shoot him in the face for selling something as what it is not.

and put a multimeter across the two pins to check how many ohms resistance they are if you decide to use them. KNOW before you wire them in so you're not going off what this kid told you