Re:TE NG25 Base Map for Turbo ZC
 

I need the base map for the new ng25. Has surfer changed his map for the new boost translation. thanks

Re:TE NG25 Base Map for Turbo ZC
 

Is anyone running the TE pm7_NG26 ROM. How does it run. I fund it posted at PGMFI and just want to make sure it's safe. I haven't switch to the new versions so I'm still on the old stable1.0 rom

DOHC ZC
w/14b
450cc

Re:TE NG25 Base Map for Turbo ZC
 

The new ROMs are fine... Boost transistion is perfect. (Thanks Dave Lee for being the bleeding edge beta tester!!)

..but ya, they have been runnig fine for a month and a half or so. YOu need to ditch that old code. It's horribly flawed.

Re:TE NG25 Base Map for Turbo ZC
 

Ya have had every intention to but lost the use of internet on my tuning laptop so had to what to get access back at my parents house. will be up this week. It ran fine. just a few blips here and there.

Re:TE NG25 Base Map for Turbo ZC
 

I ran the PM7 code in my car today in my PM6 today. I used the same exact maps that are pretty tuned in on PM6-NG25 code and weird ---- started happening.

I need to talk to Dave before I start suggesting anyone try the new PM7 code without a Wideband.

Re:TE NG25 Base Map for Turbo ZC
 

I was under the assumption that PM7 doesn't work in PM6 due to sensor conflicts... hence the reason _for_ a PM7 version.

..why wouldn't you use the PM6 version in your PM6?

Re:TE NG25 Base Map for Turbo ZC
 

The older versions of the PM& worked in my PM6 just fine...the only reason I would use it personally is because i get no CEL lights with the PM7 code where I do the Yellow CEL on the dash with the PM6 code.

I do have to try it in my PR4 however...

It did work fine...my car just didnt run fine. The only differences I know between PM6/Pm7 code is that one looks for Baro Sensor and one doesnt.

Re:TE NG25 Base Map for Turbo ZC
 

Could I just import the PM7 maps into my PM6 code? I'm running my zc with a PM6

Re:TE NG25 Base Map for Turbo ZC
 

Yep.

Re:TE NG25 Base Map for Turbo ZC
 

Just to clear things up. I have a friend arguing about timing and ECU mods. Do I or don't I do any adjustments at the Dizzy itself? or leave it one base timing. (16deg @ 800rpm)