digihippie

is it possible to use stock injectors with turbo if i will raise fuel pressure? if so, how i can raise fuel pressure with most simple way (may be add inline pump? may be do something with stock fuel pressure regulator) and where i have to place pressure gauge? and how much i have to raise pressure?

evosol

Stock injectors is not recommended but if you want you can use an FMU.

digihippie

any other ways exept fmu and 450cc? hopw i can raise fuel pressure? (after that i will use uberdata to control fuel) i just want the most ghetto setup )

TurboEF9

Translation:

digihippie

ok. i am find most quick method to blow my engine. so will i have more flow trough injectors if i will raise fuel pressure up to 120-140 psi constantly, will be that enough to support 8-9 psi and how long will last standadtr injector (if last?) with such high constantly pressure?

TurboEF9

BWAHAHAHAH!! 120psi... nice.

I don't want to say you're stupid, so I'll let someone else do that.

..take .5 seconds to do the ---- right, please.

Your motor will thank you in the end.

88crxSi

agreed if you "plan" on using uberdata then just wait til you do.

digihippie

no. i want to increase flow trhough injectors via raising fuel pressure and than rescale fuel tables with uberdata. is it possible? =)

TurboEF9

The question is... _why_ would you do that?

Increasing fuel pressure will kill your fuel pump.

Gonna buy a new fuel pump? ...instead, buy a set of injectors. Then you'll have the tools needed to tune your car correctly, and safely.

digihippie

but fmu works. as i know they raise fuel pressure... sorry for stupid question. i just want to know if that possible to supply enogh fuel with stock injectors.