I have Uberdata 1.66 and 1.7. I have a stock d16z6 with DSM 450's. How can I burn an otherwise all stock map but scaled for the 450's? Please please I am finished with the swap all I need to do is figure this out and start her up. THANK YOU SOOOOO MUCH!

 

Why not just run the stock 240cc injectors if it's a stock engine? Then you'll just have to run one of the basemaps in Uberdata. But, if your still going to run the 450's and scale them you can do a search at the Uberdata site. Theres a few writeups on how to make a basemap and they will go into detail about how to scale the injectors etc.

 

It's a long story don't ask lol.

I checked the Uber site... nothing on making a stock basemap. Any pointers?

 

It's too in depth for me to get into here but I found this.
http://uberdata.pgmfi.org/forum/inde...y;threadid=114
If your still having trouble PM me and I will give you some help. Just so you know that is for creating a basemap with boost, you don't have to worry about the boost sections if your engine is stock and non turbo but you can run the basemap anyway and your map sensor will function as stock operating off of the vacuum only comumns.

 

You are AWESOME. Thank you SOOOO MUCH. I am gonna follow that through right now I'll post up my results. Thanks again!!!

 

open stockGSR.bin then import P28 map. and set injectors at 450cc

 

dont forget to set the fuel enrichment around 50-55, and the tps cutoff at 14 or so on a stock map sensor.