Re: Solid Cel in Crome every time.
 

yup. i check it with every chip, just to be sure. it throws the cel before i even try to start it, with the key in the on position. the car starts and runs anyway.

imburne, what the ---- are you talking about?

Re: Solid Cel in Crome every time.
 

are you sure the basemap i made is with eCtune? i have a much better basemap for a stock map sensor GSR with 450cc that I always use, made in Crome...i doubt I would have made your base in eCtune but maybe.

Re: Solid Cel in Crome every time.
 

it has the ectune 2 step, and i cant read it in crome.

Re: Solid Cel in Crome every time.
 

can i have a copy of that map in crome chris?

Re: Solid Cel in Crome every time.
 

http://www.-------------/bins/index.p...Crome/B-Series

FINAL.BIN

Re: Solid Cel in Crome every time.
 

thats the bin im talking about. i cannot get it to a chip. throws a solid cel every time.

Re: Solid Cel in Crome every time.
 

that bin has knock sensor enabled...did you disable knock if you arent running a p72?

sent you the bin through email

Re: Solid Cel in Crome every time.
 

i didn't check to see if ks was enabled in that bin, but that shouldn't throw a solid cel. it should just throw a cel for the knock sensor.
we even made a brand new map, and copied just the fuel and ign values from final.bin and still would end up with a solid cell

appreciate the help,

-Luke

Re: Solid Cel in Crome every time.
 

Everything going ok during the chip burning process? Burned and verified ok? Tried another chip?

Re: Solid Cel in Crome every time.
 

yeah tried 3 different sst's in my willem for him. and i've never had a bad burn yet.

erase chip, verify, do another verify blank check, load bin, burn and verify 100% at 8000 offset.(sst 512)


-Luke