safcstange settings please help

Reply Subscribe

Thread Tools

Search this Thread

05-17-2003, 04:18 PM

civicguy

Guest

Posts: n/a

safcstange settings please help

i just instaled the safc on my 91 civic pm6 ecu,rc 440,and the car is running super lean even at idle,the thing is that if i add fuel like +17% the it gets gas but if i run -30%,-20%,-10%,do i have my setting inverted or something?

05-17-2003, 04:43 PM

Dr.Boost

3.0 BAR

Join Date: Mar 2003

Posts: 21,479

Re:safcstange settings please help

Are those injectors good? What is the fuel pressure? Did you double check the wire connections?
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

05-17-2003, 04:51 PM

civicguy

Guest

Posts: n/a

Re:safcstange settings please help

all the wires had been solder,injectors are brand new,so i just went and reset the safc to its original setting and started from there ,now it seems okay but now im getting a map code

05-17-2003, 08:15 PM

Dr.Boost

3.0 BAR

Join Date: Mar 2003

Posts: 21,479

Re:safcstange settings please help

What are the other settings at? Make sure it is set on "pressure" and set at 06-06. Also make sure it is set at "/" in the car selection.
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

05-17-2003, 08:48 PM

civicguy

Guest

Posts: n/a

Re:safcstange settings please help

what do you mean by car selection?"/" i know i got mine at 4 cyl and the arrow pointing do not point up it points up but like sideways

05-17-2003, 08:50 PM

Dr.Boost

3.0 BAR

Join Date: Mar 2003

Posts: 21,479

Re:safcstange settings please help

Yeah, thats where it should be. What about the rest of them?

__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

05-17-2003, 09:00 PM

civicguy

Guest

Posts: n/a

Re:safcstange settings please help

hot wire is set at 00/00
flap=00/00
presure sensor=06/06
from1k-8k=-40% low and high
low/high crossover=71%72%
now i was thinking if the rc440 i got are saturated or peak and hold,if they are saturated and are running on obdo ecu that use oem peak and hold do you think thats maybe the problem.

i dont know this thing is driving me crazy i have tried everything,next thing im going to do is put back my stock injectors and set them at 0%correction to see if i throw a cel

05-17-2003, 09:31 PM

Dr.Boost

3.0 BAR

Join Date: Mar 2003

Posts: 21,479

Re:safcstange settings please help

Ok, try this. Go into "Etc", select sensor type, select pressure, then set them at 06, 06 and leave that screen using the previous button. DO NOT try to set any of the others. You can only use one of them and it is the pressure. Let me know if this fixes it.
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

05-17-2003, 09:44 PM

civicguy

Guest

Posts: n/a

Re:safcstange settings please help

you are the man bro,its working but im using right now the stock injectors again,i will try the 440 tomorrow and leave the sensor setting in the way you told me but only playing with the correction points for 440cc,thanks
thanks
thanks
thanks a million times,now i can go to sleep in peace if the wife don;t kick me out of bed,i talk to you tomorrow
thanks