Romulator?????
 

What the hell is it? I was reading you need it to do realtime tuning when running uberdata. oh and how would you mix the two. thanks

Re:Romulator?????
 

1) http://www.xtornics.com

2) I don't know exactly what Blake is doing to interface with ROMulator. Last I heard, he hadn't got direct interfacing working with it. I think you'll have to use the ROMulator software to update the bin.

Re:Romulator?????
 

CORRECTION:

www.xtronics.com

Re:Romulator?????
 

i built one

its pretty neat and my ECU works. ;D

these guys are actually putting it to use

since i don't have Eprom burner or the funding to buy one.
i built one for 35 bucks ( groupbuy they had going on PGMFI.org)

http://www.pgmfi.org/phorum/list.php?f=37
they even have whole section of Forum dedicated just for that.
http://www.pgmfi.org/twiki/bin/view/...imeProgramming
these might be L33T when it comes to programming ECU's



falkhen
babble babble babble my head is spinning stop talking
:-X

Re:Romulator?????
 

i saw that but didnt really get it, can you run uberdata with that set up?

Re:Romulator?????
 

NOPE...UD has no provisions for Real Time Programming.....yet.

Re:Romulator?????
 

Well, see, "ROMulator" is a trade marked Xtronics product with it's own serial communications protocol.

..other "EEPROM Emulators" may use something else and are almost certainly not compatible with "ROMulator".

Re:Romulator?????
 

so if I built an RTP ecu which software would i use with my obd2 setup and second which realtime programmer works with uberdata?

Re:Romulator?????
 

1) No real time programmer works with Uberdata.

2) You cannot RTP your OBD2 ECU.

Re:Romulator?????
 

sorry, i meant obd1, ok would turboedit or something else work for me. and what software are they actually using with these rtp ecus ???

Re:Romulator?????
 

TurboEdit will not work for you...Chrome might.

ROM Emulators use their own proprietary software...ECUs that have RTP capability use the commands specified by the ROM Emulator manufacturers to interact with them.

The "RTP Board" is another story...its just a simple, cost effect ROM Emulator I guess...dont know much about how it works.

Re:Romulator?????
 

The OBD1 Console (TurboEDIT 2.0.12 compatible) is being maintained by Rick Krueger (Speedz).

I don't think that it's boost capable yet, but I think he has plans to incorporate it.

[EDIT]
..oh ya, and as long as the checksum is disabled in the OBD1 ROM (via the console I believe) you can use TurboEDIT's ROMulator support on OBD1.
[/EDIT]